Perentie turbo project

Quote:

---

Originally Posted by BadCo.

Good luck! No doubt Dougal will be along to help chip in.... :D


-Bad

---

Am I that predictable?:angel:

What's the turbo?

Quote:

---

Originally Posted by steveG

I can't see any fitting in the manifold/adapter for an EGT probe. Suggest you at least tap it now even if you haven't got a gauge to fit yet.

---

I see a drilled/tapped hole in the bottom of the manifold. Pretty sure he's got it covered.

Im using the td04hl-19t.
I have tapped in to the manifold for egt probe. Here's a better pic.

Having trouble trying find the oil feed though.

Having trouble trying find the oil feed

repeat

sorry see main thread

Other foreseeable issues are which way to orientate the turbo to get the turbo outlet and intercooler piping past the exhaust pipe that will be coming out of the turbo. Please excuse the dodgy sketches

I'm pretty sure that blanked port you are referring to for oil feed is a pressure relief valve of some form, but I could be wrong.
Many people have just tee-d off the vacuum pump oil feed for the turbo with no dramas.

Do you have a winged sump? If not, you can run the dump pipe down behind the engine mount and in front of the starter.

Steve

How is your exhaust leaving the engine bay?

Quote:

---

Originally Posted by walahbro

Having trouble trying find the oil feed though.

---

Lots of options here, T piece on the alternator vac pump feed or oil pressure sender. Or one of the several hex plugs in the gallery on the drivers side.