Results 1 to 3 of 3

Thread: 120 Defender

  1. 8th January 2025, 03:02 PM #1
    grey_ghost's Avatar
    grey_ghost
    grey_ghost is offline YarnMaster Silver Subscriber
    Join Date
    Apr 2011
    Location
    Wandong,Victoria,Australia
    Posts
    3,379
    Total Downloaded
    0

    120 Defender

    Hi All,

    I know that a 120 (Defender?) has a 4BD1 in it - my question is: is it correct to assume that ordering parts for the 4BD1 out of a 120 - would be the same as a 4BD1 out of a Perentie / County?

    I don't have an engine number yet - I'm just asking in advance.

    Naturally I want to replace things like air filters, fuel filters, oil filter, etc.

    Is it okay to assume that a 4BD1 is a 4BD1 - regardless of what it lives in? (120, County, Perentie) ?

    Cheers,
    GG.
    88 Perentie FFR - Club Rego
    93 Discovery 1 200 Tdi - Club Rego
    03 130 Td5 Single Cab
    06 Discovery 3 Petrol
    22 Defender 90 - Full rego
    Reply With Quote Reply With Quote
  2. 8th January 2025, 04:01 PM #2
    TonyC
    TonyC is offline Wizard Silver Subscriber
    Join Date
    Sep 2007
    Location
    NE Victoria
    Posts
    1,413
    Total Downloaded
    32.83 MB
    Quote Originally Posted by grey_ghost View Post
    Hi All,

    I know that a 120 (Defender?) has a 4BD1 in it - my question is: is it correct to assume that ordering parts for the 4BD1 out of a 120 - would be the same as a 4BD1 out of a Perentie / County?

    I don't have an engine number yet - I'm just asking in advance.

    Naturally I want to replace things like air filters, fuel filters, oil filter, etc.

    Is it okay to assume that a 4BD1 is a 4BD1 - regardless of what it lives in? (120, County, Perentie) ?

    Cheers,
    GG.
    There were 4 and 5 speeds, in the the 110s and I assume 120s, I believe all, Perenties were 4 speed.

    The 6x6s are turboed, and I know of at least 1 factory turbo 4x4 110 County.

    There are at least two types of oil filters, an element type, a spin on and maybe a twin setup.

    Other than that I believe all the motors are the same If factory fitted.

    If not factory fit then it could have the Isuzu truck flywheel housing and clutch, and the ancillaries could be anything.

    The 4BD1 exists in a few forms, Land Rover, truck, marine, stationary, with different injection pumps, flywheels, flywheel housings.

    Tony
    Reply With Quote Reply With Quote
  3. 8th January 2025, 04:03 PM #3
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    There are certainly some parts different. The most important I can think of is the oil filters. Counties and the 120 have cartridge filters, where Perenties have spin on ones - except some (many?) Counties have been converted. Accessories such as alternator and starter are different between the County and the Perentie, and I would not be certain that the 120 is the same as either, but these are probably interchangeable with little difficulty. The same would apply to aircleaner elements.

    Most engine parts will be the same or interchangeable interchangeable I expect.
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
« Personal thoughts on the Perentie/ISUZU powered LR | LT95 Second Gear Problems Possible Rebuild in Perth »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!