Results 1 to 6 of 6

Thread: Isuzu heater

  1. 12th April 2008, 03:00 PM #1
    County3.9's Avatar
    County3.9
    County3.9 is offline Master
    Join Date
    Apr 2007
    Location
    Ipswich QLD
    Posts
    249
    Total Downloaded
    0

    Isuzu heater

    What pipes fit a isuzu engine/ defender heater set-up. I've just fitted a defender heater in to an isuzu county. The pipes on the engine and the heater are a different dia. Winter is coming...
    Reply With Quote Reply With Quote
  2. 12th April 2008, 03:36 PM #2
    Bigbjorn
    Bigbjorn is offline Swaggie Gold Subscriber
    Join Date
    Jul 2006
    Location
    Brisbane, Inner East.
    Posts
    11,178
    Total Downloaded
    0
    The Isuzu pipes on mine take 5/8" ID hose.
    URSUSMAJOR
    Reply With Quote Reply With Quote
  3. 12th April 2008, 08:11 PM #3
    rar110's Avatar
    rar110
    rar110 is offline ForumSage Subscriber
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,778
    Total Downloaded
    0
    I have a defender heater in my 110. The heater end was 19mm from memory. I changed the brass outlets bits on the motor to match the heater. I got the bits from a hose place.
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137
    Reply With Quote Reply With Quote
  4. 13th April 2008, 12:13 AM #4
    County3.9's Avatar
    County3.9
    County3.9 is offline Master
    Join Date
    Apr 2007
    Location
    Ipswich QLD
    Posts
    249
    Total Downloaded
    0
    The problem I think is going from the pipes (that run along the side) to the heater. Maybe it wont be a problem, just thought I'd ask what others have done.
    Reply With Quote Reply With Quote
  5. 13th April 2008, 11:49 AM #5
    rar110's Avatar
    rar110
    rar110 is offline ForumSage Subscriber
    Join Date
    Jan 1970
    Location
    Brisbane, Queensland
    Posts
    5,778
    Total Downloaded
    0
    I used heater hose rather than steel pipe. It now runs along the edge of the guard instead of along the top of the exhaust manifold.
    L322 tdv8 poverty pack - wow
    Perentie 110 wagon ARN 49-107 (probably selling) turbo, p/steer, RFSV front axle/trutrack, HF, gullwing windows, double jerrys etc.
    Perentie 110 wagon ARN 48-699 another project
    Track Trailer ARN 200-117
    REMLR # 137
    Reply With Quote Reply With Quote
  6. 14th April 2008, 09:21 PM #6
    County3.9's Avatar
    County3.9
    County3.9 is offline Master
    Join Date
    Apr 2007
    Location
    Ipswich QLD
    Posts
    249
    Total Downloaded
    0
    I can push the 16mm hose over the 19mm ends of the heater. I've decided to go with this. The hose seems to go on without too much effort, just use a bit of spit for lube. Has anyone seen a bad ending doing this before.
    Reply With Quote Reply With Quote
« Bleeding fuel system | Water to air intercoolers. »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!