Chasing

Quote:

---

Originally Posted by isuzurover

Ahh - but the truck boxes are stronger than an LT95 and with better ratios... Could have 5:1 or 6:1 1st gear PLUS a nice tall OD top gear. 6-speed ;) is also possible. Just need to fab an adaptor to the LT230 and a cable shifter.

---

If i'm thumbing my bum with a gearbox conversion, it'll be an auto;)

Nah, will advertise it all sunday or monday after i get those bits off you:)
Unless you want to buy a T700.Lt95 convertions for your 4BD1, and a taper roller kit aswell;)

Quote:

---

Originally Posted by Vern

Nah, will advertise it all sunday or monday after i get those bits off you:)
Unless you want to buy a T700.Lt95 convertions for your 4BD1, and a taper roller kit aswell;)

---

1k for the lot? sold:D

Quote:

---

Originally Posted by rovercare

If i'm thumbing my bum with a gearbox conversion, it'll be an auto;)

---

Well have i got a deal for you:p

Quote:

---

Originally Posted by rovercare

1k for the lot? sold:D

---

Add another 2.5k and you can have the whole T700/95 conversion with shafts to go with that taper roller you just bought off me;)

Quote:

---

Originally Posted by Vern

Add another 2.5k and you can have the whole T700/95 conversion with shafts to go with that taper roller you just bought off me;)

---

My offer still stands, 1k for the lot:D could have the cash in your skyrocket on Sat:cool:

:p

Unfortunately the one I know of is not for sale, owner plans to restore it eventually.

I think you better keep looking for a bellhousing:mad:

Quote:

---

Originally Posted by dobbo

Unfortunately the one I know of is not for sale, owner plans to restore it eventually.

---

One of those "one day" projects:(

Thanks for trying:)

Quote:

---

Originally Posted by isuzurover

Ahh - but the truck boxes are stronger than an LT95 and with better ratios... Could have 5:1 or 6:1 1st gear PLUS a nice tall OD top gear. 6-speed ;) is also possible. Just need to fab an adaptor to the LT230 and a cable shifter.

---

The front output housing of the LT230 wouldn't clear the side of my 6 speed case. Looked like the input gear could have been re-splined to suit the gearbox output. But to fit an LT230 it would have to be divorced to shift it back enough.

LT95 t/case has a short front extension that clears ok, but the input gear is too far back for the length of the gearbox output shaft.