Page 1 of 3 123 LastLast
Results 1 to 10 of 23

Thread: part numbers

  1. 28th July 2008, 12:46 PM #1
    incisor's Avatar
    incisor
    incisor is offline SysAdmin (Owner) Vendor
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,689
    Total Downloaded
    32.38 MB

    part numbers

    anyone know the LR part numbers for 85 county 4bd1-T with LT85

    clutch plate
    pressure plate
    throw out bearing
    pilot bush/bearing

    front springs
    rear springs
    front shocks
    rear shocks

    2 prong fuel cap

    i cant find them in anything i own...
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
    Reply With Quote Reply With Quote
  2. 28th July 2008, 01:05 PM #2
    isuzurover's Avatar
    isuzurover
    isuzurover is offline Swaggie
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by incisor View Post
    anyone know the LR part numbers for 85 county 4bd1-T with LT85

    clutch plate
    pressure plate
    throw out bearing
    pilot bush/bearing

    front springs
    rear springs
    front shocks
    rear shocks

    2 prong fuel cap

    i cant find them in anything i own...
    Don't have the PN's, but IME, most parts places will have listings for a Land Rover (county) 3.9 Diesel 5 speed.

    No such thing as a factory 4BD1T county.

    I have king springs in mine, I am happy with them. PNs are floating around here somewhere I think.
    Reply With Quote Reply With Quote
  3. 28th July 2008, 01:34 PM #3
    incisor's Avatar
    incisor
    incisor is offline SysAdmin (Owner) Vendor
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,689
    Total Downloaded
    32.38 MB
    this thing has kings under it but they are way to stiff so i 'd say the are heavier than usual..

    the clutch would be the same i would think (hope).
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
    Reply With Quote Reply With Quote
  4. 28th July 2008, 03:13 PM #4
    isuzurover's Avatar
    isuzurover
    isuzurover is offline Swaggie
    Join Date
    Aug 2006
    Location
    WA
    Posts
    13,786
    Total Downloaded
    0
    Quote Originally Posted by incisor View Post
    this thing has kings under it but they are way to stiff so i 'd say the are heavier than usual..

    the clutch would be the same i would think (hope).
    King springs make 2 different fronts for 110s. Standard height and 2" raised.

    KRRS-02 and KRRR-02 respectively.

    http://www.kingsprings.com/kings_master_catalogue.pdf

    I have the 2" lifted srpings all round. I am happy with them. Front is a bit stiff, but mine is a touring vehicle, and by the time I bolt a winch on it will be fine.
    Reply With Quote Reply With Quote
  5. 28th July 2008, 03:46 PM #5
    incisor's Avatar
    incisor
    incisor is offline SysAdmin (Owner) Vendor
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,689
    Total Downloaded
    32.38 MB
    will see if i can find a number on these things they look quite new so hopefully something is still there..
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius
    Reply With Quote Reply With Quote
  6. 28th July 2008, 04:21 PM #6
    mitch's Avatar
    mitch
    mitch is offline Fossicker
    Join Date
    Jan 2008
    Location
    Sunshine Coast, QLD
    Posts
    75
    Total Downloaded
    0
    Fuel cap: Whats this cap from...

    Had me stumped, British offroad had no idea also. I guessed its a custom jobbie from the guy who did the conversion.
    Reply With Quote Reply With Quote
  7. 28th July 2008, 05:53 PM #7
    Bearman's Avatar
    Bearman
    Bearman is offline TopicToaster Gold Subscriber
    Join Date
    Jun 2006
    Location
    Hay Point
    Posts
    4,043
    Total Downloaded
    0
    Hi mate, I can help you with a few of these
    5 Speed clutch plate......AYG3463 (thats the normal one-dont think they make a special one for the turbo motor)
    Turbo motor pressure plate...8970317592
    Throwout (same as 4 speed).AYG3339
    Input shaft bush assembly....AYG320
    Regards.......................................Bria n
    Reply With Quote Reply With Quote
  8. 28th July 2008, 05:57 PM #8
    Bearman's Avatar
    Bearman
    Bearman is offline TopicToaster Gold Subscriber
    Join Date
    Jun 2006
    Location
    Hay Point
    Posts
    4,043
    Total Downloaded
    0
    Found another one..2 lug fuel cap ....504655
    regards....Brian
    Reply With Quote Reply With Quote
  9. 28th July 2008, 05:59 PM #9
    MacFamily's Avatar
    MacFamily
    MacFamily is offline Master Silver Subscriber
    Join Date
    Feb 2008
    Location
    Sandstone Point Qld
    Posts
    634
    Total Downloaded
    0
    Not sure if this will help Dave but have a look anyway just found it on ebay..

    Land Rover 110/Isuzu Diesel Genuine Clutch Kit - eBay, Other Car Parts, Accessories, Car Parts, Accessories, Cars, Bikes, Boats. (end time 03-Aug-08 20:32:12 AEST).
    Azza
    Reply With Quote Reply With Quote
  10. 28th July 2008, 06:05 PM #10
    Bearman's Avatar
    Bearman
    Bearman is offline TopicToaster Gold Subscriber
    Join Date
    Jun 2006
    Location
    Hay Point
    Posts
    4,043
    Total Downloaded
    0
    That one on EBAY is a 4 speed clutch kit. The clutch plate is for a 4 speed with turbo motor AYG3616 and the pressure plate is for a non turbo motor-Part No.5312200240.Throwout bearing is standard....Regards..Brian
    Reply With Quote Reply With Quote
Page 1 of 3 123 LastLast
« Turbo conversion and rego? | Isuzu stickers »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!