Thread: Isuzu Land Rover stickers

id get into a coupla ......

Originally Posted by rijidij

I've been looking into getting some stickers printed. A couple of members on here have expressed some interest in them, so I thought I'd ask if anyone else would like some. At the moment I would just like expressions of interest to get an idea how many it's worth getting printed.
I am NOT looking at making any sort of profit out of this. I would be happy just to cover my costs if it's worth going ahead with.
From the quotes I've received they would probably cost between $1 and $2 each, but I will have to confirm a final price.
They will be glossy 120mm x 65mm and professionally printed and cut out. One place I talked to guaranteed they wont fade for 3 to 5 years.
I've come up with 3 different versions to cover differing engine setups.
Let me know what you think of the designs below.

Cheers, Murray

Originally Posted by isuzurover

John (Bush65) and I make 8
Dougal - you want any?

I am happy to order more if it makes the difference.

I would also order more of the Tdi version if it helps.

Originally Posted by JDNSW

Colour? - when the 110 was produced with the Isuzu, the Landrover emblem was silver on black

G'day JD,
Would you prefer something like this. I might even be able to make this version 180mm wide.

Just updating the designs which I've either altered or added using everyone's comments as a guide.
I spoke to the printer today. I should be able to include all variants of the sticker. It will cost a little more, maybe $20, for them to spend more time programming their machine, but it doesn't seem to be a big deal.

As for the size........I tried a couple of samples on my car and 120mm looks ok, but I'm considering making them 140mm, big enough, but small enough to still be reasonably subtle and a bit easier to read the bottom text. Maybe the black and silver one could be 180mm (could cost a little more) as JD suggested some people might like to be closer in style and size to the original decal on the back of 110's.


I'll keep an eye on this thread for say, the next week, then that should be a good indication of numbers required. After talking to the printer, I'm confident that they will come in at under $2 each. The final price will be confirmed on here before taking firm orders.

If you do the silver on black close to the original size, increase my order to four - actually, increase it to four even if it is a bit smaller.

John

Hi Murray,

You can put me down for 4 "3.9 turbo intercooled" thanks

Westy

my $0.02's worth Murray - too many options might detract from the intention...

but having seen the black on silver/grey - could you ask about printing plain black onto an aluminium base material?

Originally Posted by EchiDna

my $0.02's worth Murray - too many options might detract from the intention...

but having seen the black on silver/grey - could you ask about printing plain black onto an aluminium base material?

I just had some stainless steel machinery tags done up for work. With a quantity of 200 the price was around $10 each, setup and freight was around $150.
Aluminium would be cheaper, but still more than half the price.