Page 3 of 3 FirstFirst 123
Results 21 to 25 of 25

Thread: portal axles

  1. #21
    Join Date
    Oct 2010
    Location
    Dixons Creek Victoria
    Posts
    1,533
    Total Downloaded
    0
    Thanks Slug Burner.I now have a clearer understanding of what Centre Of Gravity actually means.
    But as I stated earlier, for the purpose of this excercise we are getting hung up on terminology, and in relating trackwidth to Centre of gravity, probably should use a term such as 'centre of balance' or 'centre of stability'.
    Wagoo.

  2. #22
    Join Date
    Nov 2009
    Location
    Western Sydney
    Posts
    2,182
    Total Downloaded
    0
    Quote Originally Posted by wagoo View Post
    Thanks Slug Burner.I now have a clearer understanding of what Centre Of Gravity actually means.
    But as I stated earlier, for the purpose of this excercise we are getting hung up on terminology, and in relating trackwidth to Centre of gravity, probably should use a term such as 'centre of balance' or 'centre of stability'.
    Wagoo.
    Bill
    I think the term that you are looking for is Centre of Mass,and changing the centre of mass can be offset by changing the vehicle track width.
    Have a look at this page Weight transfer - Wikipedia, the free encyclopedia .I bring your attention to the section marked Cause: and the last paragraph in that section.
    There is much interesting reading to be found by also looking here Vehicle dynamics - Wikipedia, the free encyclopedia

    And yes I agree with your assumptions Bill,but explanations come back to terminology

    Wayne
    Wayne
    ​VK2VRC
    "LandRover" What the Japanese aspire to be
    Taking the road less travelled
    '01 130 dualcab HCPU locked and loaded
    LowRange 116.76:1

  3. #23
    Join Date
    Oct 2010
    Location
    Dixons Creek Victoria
    Posts
    1,533
    Total Downloaded
    0
    Quote Originally Posted by LowRanger View Post


    Bill
    I think the term that you are looking for is Centre of Mass,and changing the centre of mass can be offset by changing the vehicle track width.
    Have a look at this page Weight transfer - Wikipedia, the free encyclopedia .I bring your attention to the section marked Cause: and the last paragraph in that section.
    There is much interesting reading to be found by also looking here Vehicle dynamics - Wikipedia, the free encyclopedia

    And yes I agree with your assumptions Bill,but explanations come back to terminology

    Wayne
    Thanks for the links Wayne.
    I also found an interesting article this arvo on the Jeepaholics Anonymus website, Center of Gravity and Roll-Over Angle - Jeepaholics Anonymous Titled 'Determining centre of gravity and roll over angles of your vehicle' that explains a few things fairly clearly in laymans terms.
    Wagoo.

  4. #24
    slug_burner is offline TopicToaster Gold Subscriber
    Join Date
    Jul 2007
    Location
    Melbourne
    Posts
    4,024
    Total Downloaded
    0
    Quote Originally Posted by wagoo View Post
    Thanks Slug Burner.I now have a clearer understanding of what Centre Of Gravity actually means.
    But as I stated earlier, for the purpose of this excercise we are getting hung up on terminology, and in relating trackwidth to Centre of gravity, probably should use a term such as 'centre of balance' or 'centre of stability'.
    Wagoo.
    Yes I agree that we can get hung up on what appears to be technicalities of the terminology. However in a highly textually based discussion forum, words mean everything i.e., they carry all the meaning. We don't have facial or hand gestures to elaborate the points we are trying to get across and what I think I am writing may not always get the point across. I find pictures either photos or simple graphics can convey much meaning. There is a great advantage to actually have the stuff in front of the people involved in the discussion as there is nothing like seeing and touching I find. Earlier in the "130 on portals thread" when discussion went to anti dive and scrub angles etc. The terminology was something I had limited prior exposure to and I certainly was not confident of the exact meaning but google helped with finding a few diagrams or definitions which would probably would have been more difficult to do if it wasn't for the use of commonly accepted terminology.

    Anyway this is getting away from the original intent of this thread. I'll sit back and try and absorb the ideas that you more experienced people discuss and pipe in with question or three when it is all getting a bit beyond me.

    Thanks for making this place an enjoyable and interesting place.

  5. #25
    Join Date
    Oct 2010
    Location
    Dixons Creek Victoria
    Posts
    1,533
    Total Downloaded
    0
    Thanks again Slug Burner.I'm also very much a layman when it comes to engineering and terminology.and similarly,as Rick 130 once admitted,"I know just enough to be dangerous''.
    Wagoo.

Page 3 of 3 FirstFirst 123

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!