Page 8 of 10 FirstFirst ... 678910 LastLast
Results 71 to 80 of 92

Thread: Koni Shock absorbers

  1. #71
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    both, not sure on the o/d,s

  2. #72
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,127
    Total Downloaded
    99.87 MB
    Thanks. Tangent - Sounds like coilovers/Airshocks wont fit through the front perches in that case.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

  3. #73
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    I don't have to worry about the fronts hitting the springs as I run eas turrets.

    Will see if I can borrow some and see how bad they fit, have a mate with some cruiser ones he's yet to fit.

  4. #74
    Join Date
    Sep 2007
    Location
    Kiwiland
    Posts
    7,246
    Total Downloaded
    0
    Check out the damper placement on this US RRC build: KOH 2015 RRC build - Page 2 - Pirate4x4.Com : 4x4 and Off-Road Forum

    It's very tight, but he has fit coil-over dampers (without the springs screwed on) in the original front position. You might need a pirate login to view.


  5. #75
    Join Date
    Jan 1970
    Location
    Gold Coast
    Posts
    5,101
    Total Downloaded
    0
    Page 1...

  6. #76
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Quote Originally Posted by Vern View Post
    Well after just speaking with Andrew Richmond, he informs me that the 90 series don't fit, they hit on everything, particularly when articulating. He says the 88 series is a better shock, but is a very tight fit, which still hits as well.
    Bugger.

    You wonder how Koni can sell them if the space is so restrictive.

    Slunnie, the OD is 70mm for the bodies, then you have the dust cover.
    FWIW I machined off the dust covers on the TLC 80 Series I'm running as originally I was going to invert them and use cut down Billie bodies as an external reservoir.

  7. #77
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,127
    Total Downloaded
    99.87 MB
    Quote Originally Posted by rick130 View Post
    Bugger.

    You wonder how Koni can sell them if the space is so restrictive.

    Slunnie, the OD is 70mm for the bodies, then you have the dust cover.
    FWIW I machined off the dust covers on the TLC 80 Series I'm running as originally I was going to invert them and use cut down Billie bodies as an external reservoir.
    Excellent, thanks for this Rick - very interesting fitment wise!
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~

  8. #78
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Serg has a pair of 88 Series on the rear and I can't recall him ever mentioning them fouling anywhere.

    Beadell tours run 90 Series all round on their 110 and rave about them on their website.
    Maybe a case of sponsorship ?

    Haven't rung Superior yet, just drafting an email for some specific diff lube for a certain locker and finalising an order from Karcraft.

    [edit] Just emailed Superior/Profender requesting open/closed lengths. Will try and ring tomorrow.

  9. #79
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    Yeah I've read and heard of quite a few rovers running the 90 series with no dramas, it may be a long travel thing though. But I did feel like I was being spoken down too in our conversation, I thought I'd rung jacmac for a minute there

  10. #80
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    Will be good to here how you go rick, I think I will go down this route as well, I just don't know much about the Amada or Profender shocks in regards to reliability etc.....I think Suspension Stuff deal in them as well.

Page 8 of 10 FirstFirst ... 678910 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!