-
28th October 2013, 09:19 PM
#1
Puma 2 inch lift issues
Hi, guys was looking for some advice regarding a 2 inch lift on a Puma. I have just fitted a TF209 kit and took it for drive last weekend. In short my rear springs dislocated and my sway bar inverted.
Initial enquiries about the lift was that I would not need dislocation cones or something to realign the sway bar.
So I guess I now need cones, but my question is what do I do about the sway bar, as I am struggling to find any solutions?
Thanks in advance
Darren
-
30th October 2013, 08:36 PM
#2
You could do what I have done with both my sway bars. Take them off and hang them up in the shed.
-
1st November 2013, 05:58 PM
#3
If money is no object, consider the X-Engineering sway bar solution.
X Deflex Anti Roll Bar for Land Rover Defender, Discovery & RR Classic (With 30mm Spacer)
Don't know anyone that has one fitted but i recall a post on AULRO offering feedback.
MLD
-
30th August 2014, 05:32 PM
#4
arb do a suspension kit and it has 25mm spacers for the sway bars
might be able to get the spacers separately tho as the lift kit is no good for a puma
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks