Results 1 to 4 of 4

Thread: 3 Link Front

  1. 25th May 2016, 05:27 PM #1
    Not_An_Abba_Fan
    Not_An_Abba_Fan is offline Master
    Join Date
    May 2012
    Location
    Dalyellup
    Posts
    165
    Total Downloaded
    0

    3 Link Front

    I've been thinking about converting my front suspension to 3 link. I have Patrol diffs and I'm changing the front housing, I have to clean all the Nissan brackets off anyway, so I was thinking while I have a bare housing, I may as well do a 3 link conversion.

    Anyone here run one on an RRC or D1?
    Reply With Quote Reply With Quote
  2. 28th May 2016, 11:04 PM #2
    Hall's Avatar
    Hall
    Hall is offline Wizard Subscriber
    Join Date
    Oct 2009
    Location
    Cranbourne North
    Posts
    1,929
    Total Downloaded
    0
    My old hybrid ute, which had a rangie chassis, also had a three link front and a four link rear. The way the three link was done created a low point next to the diff where the center link mounted to the axle right next to the diff. It also created a wide area to hang up on. The link ends at the axle used standard rover bushes the other end used racing grade rose joints.
    Cheers Hall
    Reply With Quote Reply With Quote
  3. 30th May 2016, 01:16 PM #3
    Not_An_Abba_Fan
    Not_An_Abba_Fan is offline Master
    Join Date
    May 2012
    Location
    Dalyellup
    Posts
    165
    Total Downloaded
    0
    I had a good look at it yesterday and I think I have enough room for the top arm and mount to move up between the oil pan and the RHS extractor. I've already modified the extractor to clear the pinion as it used to hit and wore a hole through them.
    Reply With Quote Reply With Quote
  4. 2nd July 2016, 07:09 PM #4
    rick79's Avatar
    rick79
    rick79 is offline Master Supporter
    Join Date
    Oct 2014
    Location
    brisbane
    Posts
    125
    Total Downloaded
    0
    jump onto pirate4x4 forums mate...there is a world of info on 3 and 4 link suspension systems front and rear. Even a number of threads on rover 3 links. If you are going to do your own, do your homework, and use the MS excel '3 LINK CALCULATOR' to wok out where is the best place for your link mounts in terms of getting a your roll axis, anti squat figures as best you can working around the constraints you have in the front end in terms of link placement.
    Reply With Quote Reply With Quote
« ARB Bypass Shocks, whos running them? | Koni Raid Vs Koni Heavy Track »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!