Thread: 2011 Range Rover Sport Mods?

I've just bought a 2011 Range Rover sport tdv6 and wanting know good mods for it to prevent issues?
Diff breathers?
Rust protection?
Extra filters, upgraded filters
Computer upgrades?
Under body protection?
I know this is a very general question, just want to get the right mods from the beginning to make sure this rig lasts a long time.

For underbody protection, Green Oval Experience out of Perth has a good range and is well regarded by many on this forum.
Green Oval Experience Land Rover training, Range Rover modifcation

A more local option in Brisbane is APT Fabrication, although the full range of plates are still under development.
http://aptfabrication.com.au/home
I have APT sliders, compressor plate and front plate on my D4 and consider them to be excellent.

The first piece of protection you need to consider for going offroad is the air suspension compressor guard.
It is somewhat vulnerable, being located just in front of the passenger rear wheel and sitting partially lower than the chassis rail.
A D3/D4 guard should fit an L320 RRS being a common chassis but there may be subtle fitment differences.

Further underbody protection really depends on what kind of terrain you intend to take the RRS.

Another area worth reading is the FAQs in the D3/D4 section.
This is because there is so much shared between the vehicles and the D3/D4 section is more active.
You'll find a lot of relevant info. For example engine/transmission/wheels
http://www.aulro.com/afvb/l319-disco...4-rrs-faq.html
http://www.aulro.com/afvb/l319-disco...ssion-faq.html

Regarding engine chipping, there are a few options. Here's one that is very highly regarded:
BAS Performance Remaps. Landrover tuning at its best!

An aftermarket option that allows better control over suspension height that is really worth considering is Llams:
http://www.aulro.com/afvb/verandah/1...d3-d4-rrs.html

Cheers,
Scott