Embarrassment

Quote:

---

Originally Posted by Ausfree

Yep, we have already picked it out Brian, the fourth line from the bottom, the word "strength" is misspelt. Isn't it funny how mispelt words seem to jump out at you.:D Actually after having another look at the sign, the word "Regiment" is spelt as "Reciment", really the sign is a disgrace and should be taken down and corrected!!

---

Gday Jim, I discounted that Regiment as if you look close, it is a G, with a very small extra horizontal mark to differentiate it from a 'c'.

My bad, I just re-read it and you are right, there are several other regiments spelt correctly.

Yes, I do remember our discussion, long time ago eh!

Hey Tony Your going to be busy..Did use get the blue tray back up & running.I know that timming will get use All the set up.It even takes me a while with a new dizzy in setting it all up to find out it wont run so in & out with the dizzy to move the rotor button..:D

we did have a little fiddle with the dizzy but it is going but it needs a bit finer adjusting on the timing. we need to take the radiator out though because there is a white oilly drip coming from the front of the motor

but that is going to have to be for my brother and dad to do as I am strapped for time as it is.
doing some shopping at sydney for clothes on wednesday as well. today back to the dentist , sorting more parts out and making some wooden pens with my grandpa

Quote:

---

Originally Posted by Landy Smurf

we did have a little fiddle with the dizzy but it is going but it needs a bit finer adjusting on the timing. we need to take the radiator out though because there is a white oilly drip coming from the front of the motor

---

HHHHMMMMMM not sure what that would be .Whats the oil like on the dipstick..It may just be a loose bolt on one of the front covers As i dont tighten fully till i have them back in the car..& there was not water contamination what so ever before i rebuilt it.I'll have to think about that one.

it may be a seal at the front there but we will have a quick look some other time. there is a bit of water in the dipstick, not much there but a little

Quote:

---

Originally Posted by Landy Smurf

it may be a seal at the front there but we will have a quick look some other time. there is a bit of water in the dipstick, not much there but a little

---

Could be condensation from sitting so long..Mite need a good tune & a good run..

it could be condensation it was dripping quite a lot i will get some photos

here should'nt be any water in the oil at all.. The only thing that i encounted when building it was one of the centre head bolts was striped & i drilled it & taped it & put a recoil in it or rethread..& was told & sold the bits from an engine building shop..That may have come loose but i cant see it happening... Before i i even pulled the car apart i was driving it to move it around a bit & there was nothing in the oil at all..Its got me worried now..

I got the badge i brought off ebay the other week.Its for the 50 years of landrover..Its about the size of a largish belt buckle.Now i have to find another one so i can put one on each gaurd of Harry..So if anyone sees one let me know..

https://www.aulro.com/afvb/images/im...013/02/261.jpg

If i cant find another i mite turn this one into a belt buckle..