Thread: Embarrassment

Originally Posted by Landy Smurf

being lazy today all I got done was putting my toolbox together.
Might put the engine crane together later if I find my long lost friend aka motivation.
Have been seriously thinking about getting one of those sandblasting boxes.
here are some photos of the toolbox with some of the tools in it.
screwdrivers:check
socket set:check
spanners:check
ratchet spanners:check
pliers:NTG
Soft hammers:NTG
Land Rover stickers:NTG
I bought a SCA 1/2'' ratchet when they had them 1/2 price, and we all know how many bloody nuts and bolts are on land rovers and how painful it gets by yourself so I thought I would give it a whirl.
Oh and a photo of the dog...why not

Jeez, mate your toolbox is sideways and the tools are not falling out. Very clever!!!!

That is because it is in smurf villiage

Or Tony took the picture lying down, Jim.

Originally Posted by Landy Smurf

being lazy today all I got done was putting my toolbox together.
Might put the engine crane together later if I find my long lost friend aka motivation.
Have been seriously thinking about getting one of those sandblasting boxes.
here are some photos of the toolbox with some of the tools in it.
screwdrivers:check
socket set:check
spanners:check
ratchet spanners:check
pliers:NTG
Soft hammers:NTG
Land Rover stickers:NTG
I bought a SCA 1/2'' ratchet when they had them 1/2 price, and we all know how many bloody nuts and bolts are on land rovers and how painful it gets by yourself so I thought I would give it a whirl.
Oh and a photo of the dog...why not

Tony be very carefull when you open the drawers on that brand of toolbox. They tip over very easily.& usualy onto feet.Or you will try to catch it & save the top only to get your feet smashed by the bottom when it gets your feet while trying to hold the top half..

I have to oil the bearings up yet.
I will keep that in mind jason.
Going to Lake Cathie to pick up this series 2a fingers crossed all goes well

got home not without some issues though.
The land rover drives but needs some work. there is quite a lot of rust in the firewall, have not checked the chassis yet. the body isnt too bad

This is how i entertained myself this afternoon. There are lots of things I could have done but meh that is future Tonys problem
damn slow internet

We have been away for 5 days with the 101 for a military event in Bundaberg

Missed a bit...

Fred, read all the Maccas tutorials and you will succeed. So many think they can get by without them, they are wrong. If you read them you will let management know you are enthusiastic about your job GOOD LUCK

What else have I missed?

Mrs hh