Thread: LED Light Bars....Special offer

Originally Posted by rijidij

I'm waiting for a reply from my supplier about shipping costs for all the different sizes. When I have that info I'll be able to work out a final price on them.
The only hold up with stocking the various sizes is, they only ship in lots of 12 lights for the 30W, 6 lights for the 60W, 120W and 180W, and 4 lights for the 240W.
Now, I'm not made of money so I'm not prepared to outlay thousands of dollars for idle stock, but I am prepared to import what's needed to satisfy any serious expressions of interest, for example, if I had 4 orders for 120W (25 inch) lights I would probably get a box of 6.

We'll see what the prices are like first.

Cheers, Murray

No worries mate, If you get a price let me know and if it suits I can pay up front.

Cheers

Originally Posted by isuzurover

Murray - do they make one that could fit between the uprights on an ARB (Tdi) bullbar? i.e. where the spotlight mounts are.

The 120w bar should fit between the uprights on the arb bar, from memory the space between my rangie bar is approx 750mm. Could put one above and one below the top bar.

Originally Posted by isuzurover

Murray - do they make one that could fit between the uprights on an ARB (Tdi) bullbar? i.e. where the spotlight mounts are.

Originally Posted by Vern

The 120w bar should fit between the uprights on the arb bar, from memory the space between my rangie bar is approx 750mm. Could put one above and one below the top bar.

The space between the uprights on my County ARB bar is 670mm. I'm guessing this would be the same ARB bar on Tdi vintage Defenders, so the 120W bar would fit nicely at 633mm

Cheers, Murray

What would the 120w bars be worth Murray?

OK, I've received the shipping costs and this is what I've come up with as far as prices are concerned.
These are AULRO Member Prices. I've been looking at light bars for the last year. These are the first ones I've seen which I thought offered realistic value for money (although untested)

For freight within Australia, the 240W lights have to be sent by courier because of the length, but all the others will be able to go with Aust Post. The 240W light only weighs <5kg so postage costs for the shorter ones shouldn't be too much. I'll be posting from Vic 3240.

So, at this stage I'm taking expressions of interest until we get sufficient quantities to justify an order.

Please state which light and beam pattern you're interested in.........

Example 1 : 120W Spot

Example 2 : 60W Flood

Example 3 : 180W Combo (This is a combination of spot and flood)

Cheers, Murray

120w combo? Is that available?

Originally Posted by Vern

120w combo? Is that available?

Yep, any of the lights can be ordered with the beam pattern of your choice.
The configuration of the combo seems to be half spot in the middle and half flood split to the ends, except for maybe the small 30W light which has just the two floods as in the pic, but I'm sure this can be ordered as all spot or all flood.

I haven't confirmed this, but I reckon they would ship lights of different beam patterns in the one box, but of the same length, so if I get a mix of beam preference I should be able to order them sooner instead of waiting for numbers of each type.

Cheers, Murray

I tried adjusting the light bar up a bit. There was some improvement with less glare on the ground and a little more intensity straight ahead.

Cheers, Murray