Thread: Drawers for D1,D2,D3 and Defender $950

Hey, VladTepes, if you're after drawers for 130 tub, I have a set I removed when I replaced my tub with a tray. They were custom made by the previous owner and are very sturdy. The runners are 25mm square steel tube running on about 10 x 40mm bearings per runner (x 2 runners per drawer x 2 drawers) - very smooth.

Only problem is I'm in Melbourne and you're in Qld.

Still, if you're interested, email me fclandy @ gmail.com

HI Sith,
Yeah it was discussed that they would be higher. If they wer made to fit level with the wheel arches the draw would only be 180mm in depth which isnt much - so I asked Jim if he could make up some panels to make it all flat (much nicer job). Im sure that if you asked Jim he could supply panels using mine as a template (im not sure if he kept the measurements but im happy to provide them).

Originally Posted by fclandy

Hey, VladTepes, if you're after drawers for 130 tub, I have a set I removed when I replaced my tub with a tray. They were custom made by the previous owner and are very sturdy. The runners are 25mm square steel tube running on about 10 x 40mm bearings per runner (x 2 runners per drawer x 2 drawers) - very smooth.

Only problem is I'm in Melbourne and you're in Qld.

Still, if you're interested, email me fclandy @ gmail.com

Will do.

mine dont even fit side to side , there is 75mm each side of wasted space

please email me the spec's !!

silvabak@iinet.net.au

Originally Posted by kram

HI Sith,
Yeah it was discussed that they would be higher. If they wer made to fit level with the wheel arches the draw would only be 180mm in depth which isnt much - so I asked Jim if he could make up some panels to make it all flat (much nicer job). Im sure that if you asked Jim he could supply panels using mine as a template (im not sure if he kept the measurements but im happy to provide them).

Hi

I will take some more pics and measurements over the weekend and email them to you

Cheers

I'm somewhat mystified here.

I can assure you Kram's and Sith's units are identical width. There is certainly a gap on the driver's side to allow for the hinge on the back door. We have maximised the useable space.

Sith's unit was the first Defender we did and was based on measurements taken at a LR dealership. I made it clear to Sith that the unit would be higher than the wheel arches.

Unfortunately when Sith ordered we were unable to do wing extensions as we need a car on site for some hours to measure and CAD them. Kram's car is the first Defender we have had on site.

I messaged Sith earlier today to advise him we could supply the wings now, should he be interested.

Jim.

how much and freight to Perth

From your pic's , mine has the same gap you have .... but mine is on both sides not just drivers side .
mine has a cargo barrier to so that wont allow for the rear section .

Originally Posted by kram

Ok well finally got some pics - Jim from Best off Road in Vic did a great job. I added the front panel with some legs on hinges so that we could sleep in the back if needed - was one of the most comfortable sleeps we have had in a long time.

The draw is great and the panels on the side provide room for maps and books etc - also the gap to alllow for the drawer openning/ door hinge is great to store the jack, fishing rods, rope and extra tools!

here are some pics - Thanks again to Jim!