What's in your on board tool kit?

[pop058]

[benji]

I didn't know the old 80" was a 5cyl😆.

For me it's a full set of metric and imperial spanners, and 3/8 drive sockets.

Pliers, hammer, breaker bar, 27mm, 32mm, and 42mm socket. An extra 9/16 ringy (for tailshaft), 15mm 1/2" socket.
Hacksaw blade
Welding glass and a few 2.8 sticks

Spares include a full set of water hoses, various engine sensors, orings for eas and injectors, gasket goo, couple of spark plugs, spare uni joint, soap, gas soldering iron and a few plugs, wire etc, and soldering flux, shrink wrap, thread sealant, locktite a spare front and rear airbag....and the general things like cable ties gaffa tape.

Sent from my SM-G900I using AULRO mobile app

[1950landy]

That's the one we have in our new Hyundai I30 diesel, properly won't need it but did need it for the Citron C4.

[1950landy]

I didn't know the old 80" was a 5cyl😆.

For me it's a full set of metric and imperial spanners, and 3/8 drive sockets.

Pliers, hammer, breaker bar, 27mm, 32mm, and 42mm socket. An extra 9/16 ringy (for tailshaft), 15mm 1/2" socket.
Hacksaw blade
Welding glass and a few 2.8 sticks

Spares include a full set of water hoses, various engine sensors, orings for eas and injectors, gasket goo, couple of spark plugs, spare uni joint, soap, gas soldering iron and a few plugs, wire etc, and soldering flux, shrink wrap, thread sealant, locktite a spare front and rear airbag....and the general things like cable ties gaffa tape.


Sent from my SM-G900I using AULRO mobile app

When I found the Rover park plugs there were 5 & the box I found at Masters also held 5.

[Anth]

All this and no cable ties?

Ah forgot to list them! 100,200 and 300mm cable ties, and a few of those massive thick 400mm ones