Reply With QuoteHopefully a clearer picture.
I got the feed for nothing, so I can't wheel and deal with it.
Super Moderator
Trying to make a perimeter frame for the benchtop. The MDF will sit in the frame.
If you don't like trucks, stop buying stuff.
Super Moderator
Hopefully a clearer picture.
I got the feed for nothing, so I can't wheel and deal with it.
If you don't like trucks, stop buying stuff.
RoverLord
OI that's my surname you are messing withOriginally Posted by V8Ian
Bloomin' wood, only good for barbecue fuel, it won't weld and you can't roll or bend it.
BUS DRIVER
Andrew
DISCOVERY IS TO BE DISOWNED
Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
Snow White MY14 TDV6 D4
Alotta Fagina MY14 CAT 12M Motor Grader
2003 Stacer 525 Sea Master Sport
I made the 1 millionth AULRO post
RoverLord
Can you get something from Ikea or Bunnings that's pre-fabbed????
Andrew
DISCOVERY IS TO BE DISOWNED
Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
Snow White MY14 TDV6 D4
Alotta Fagina MY14 CAT 12M Motor Grader
2003 Stacer 525 Sea Master Sport
I made the 1 millionth AULRO post
Super Moderator
Coach Captain if you please!OI that's my surname you are messing with
BUS DRIVER
Andrew
Not really, because the aisle is the datum, the benchtop has to be 950 wide.
If you don't like trucks, stop buying stuff.
Master
Routers are one of the most dangerous tools around. Lots of different ways to come unstuck. Please don't touch it again until you've watched plenty of YouTube videos.
Small nibbles at it each time and steady movement. Safety gear and a healthy respect for the potential hazards. Practice on waste wood until it's working well.
Patience.... and don't try to weld it... or grind it or bend it....(In fact you can actually bend it.... )
PS... I'm not any good at it... but I like pottering around with wood occasionally. Only a beginner though.
Super Moderator
Actually, I have found that wood will bend, but it won't bend back.
Thank for the PM Andrew, I'll practice again tomorrow, taking small bites, on offcuts.
If you don't like trucks, stop buying stuff.
Super Moderator
I should be okay, I'll wear a bright yellow work shirt 👚, my employer seem to think they make us bullet proof.Routers are one of the most dangerous tools around. Lots of different ways to come unstuck. Please don't touch it again until you've watched plenty of YouTube videos.
Small nibbles at it each time and steady movement. Safety gear and a healthy respect for the potential hazards. Practice on waste wood until it's working well.
Patience.... and don't try to weld it... or grind it or bend it....
PS... I'm not any good at it... but I like pottering around with wood occasionally. Only a beginner though.
If you don't like trucks, stop buying stuff.
OldBushie
Yeah, get it right.
Coach Captain if you please!
Not really, because the aisle is the datum, the benchtop has to be 950 wide.
Super Moderator
Yeehah! I've got this baby sussed, do it in small increments. The only minor issue is where I restart is a tad ordinary.
A router table would be the go.
If you don't like trucks, stop buying stuff.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks