Thread: Which welder?

What do people know of euromig? I can't find any documentation in English (all the web pages are German) but thought I should check before completely dismissing it.

I'm now hoping to find a decent second hand MIG/MAG machine. I'm not really in any rush so hopefully something will pop up.

Originally Posted by Disco-tastic

What do people know of euromig? I can't find any documentation in English (all the web pages are German) but thought I should check before completely dismissing it.

I'm now hoping to find a decent second hand MIG/MAG machine. I'm not really in any rush so hopefully something will pop up.

I got a 250 Amp UniMig secondhand off Fleabay a couple of years ago for around the $600.00 mark been brilliant for my home handy man stuff .
Can say i use it maybe 3 to 4 + times a month , i use gas as i brought my own E size bottle which cost half as much as the welder but has paid for it`s self in rental cost
Previously i had a cig handimig gasless (and gas if needed) and i always found it wanting
Never looked back with the Unimig with just a few consumable`s as tip`s shroud`s and a liner over time
It is fit for my purpose maybe not for every ones taste

So long story not so long...

I bought a mig second hand off eBay. It was a weldcorp (rebadged Italian awelco) for $210 off eBay, thinking I'd snagged a bargain. When I picked it up it didn't have any leads or torch, so not so much of a bargain. Turns out the listing wasn't clear at all, so seller offered a refund, which I took.

So I kept looking and found a new AC/DC tig welder for $500. AIG TIG200

Now I am fully aware that mig is easier, and faster, but I've always wanted to learn tig and if this machine is even half decent at its price point its exactly what I want. Im only a DIY/hobbyist and I'm sure a professional or prosumer would find fault with this machine, but if it does whait I want I'm a happy little vegemite. Parts are available in Australia if something does bust, and all the reviews I've read (from home hobbyists, mind you) are positive. The company have been great to deal with too.

I only just got the machine today and probably won't have time to play with it for a few weeks but I will post up what I think when I get a chance.

Thanks everyone for your assistance and opinions. I am grateful for the sounding board to bounce my thoughts off.

Cheers

Dan

s-l1600.jpgI bought this one just set the width of the weld & power & it does the rest.20180702_114144.jpg can be used either wit gas or flux core. I find it better with gas other wise you need to chip weld same as stick welding. When we had our steel & alum fabrication business we always got a good run out of the Kemppi machines.

UltraTech | Tactical Welder

I'll pack one on my next remote trip. Right next to my tactical shoelaces.

For AC TIG I am taken by the Renegade 200 amp. Very cheap for an AC Pulse TIG. One review said in reality it didn't go as low as the dial said for pulse frequency namely 0.5 Hertz and was more like up to 3. So I have asked TradeTOols the question and they are getting onto their supplier for me. Excellent service those guys. Comes with foot pedal. All for under $800 clams.

I know...not known brand but about 500 to 600 cheaper than Unimig Razorweld and both Chinese. Tradetools do back their gear well too.

I thought about running straight clean helium on my DC LIft Arc Esseti but prefer slower and cleaner for thin sheet alloy. Cheers