Landrover wheels on your camper

**Redback** · 24th January 2005, 12:22 PM

I have found a place that has SII Discovery hubs to fit to your camper trailer so as to have the same wheels as the tow vehicle, finding hubs for the SII Disco was very difficult unless you had the maker of the camper put them on when you bought it and the fact that the SII Disco has a differant stud pattern to the SERIES I

. I rang about 10 or so trailer manufacturers and had no luck until these guys, so all you Disco SII owners this is for you.

www.allstatestrailerspares.com.au

All States Trailer Spares on the central coast, contact is (02)4353 2224.

[img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img]

Baz.

**dickyjoe** · 24th January 2005, 01:31 PM

Gday

Isnt the S2 disco hubs the same as RR, Flander, BMW and ford???

Rich

**Redback** · 24th January 2005, 01:46 PM

No the RR P38A yes centre to centre is 120mm, ford is 114mm don't know about BMW.

**incisor** · 24th January 2005, 02:17 PM

hard enough to find someone that will supply series 1 disco hubs....

**Redback** · 24th January 2005, 04:14 PM

Well you will be glad to know he does all landrover [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img]

**Bytemrk** · 24th January 2005, 10:45 PM

Great find Redback

My camper still has Tojo rims

ops:

Now I have the source of the parts I need....... all I have to do is to wait for that bloody money tree to fruit :?

**DEFENDERZOOK** · 25th January 2005, 07:23 AM

Originally posted by Bytemrk
Great find Redback

My camper still has Tojo rims ops:

Now I have the source of the parts I need....... all I have to do is to wait for that bloody money tree to fruit :?

your still doing better than me.....you got a camper. :wink:

**Tyrepower** · 3rd February 2005, 01:13 PM

I just picked up my camper in Melbourne over Xmas. Told the builder I wanted L/R stud pattern. Picked up some rims off 200tdi in the for sale thread on my way through SA and drove back to WA in comfort and luxury.

**p38arover** · 3rd February 2005, 02:20 PM

Originally posted by Redback
No the RR P38A yes centre to centre is 120mm, ford is 114mm don't know about BMW.

P38A and Disco II have the same PCD (pitch circle diameter) so wheels from either will bolt onto the other. BMW rims also fit.

Ron

**p38arover** · 3rd February 2005, 02:34 PM

Originally posted by incisor
hard enough to find someone that will supply series 1 disco hubs....

AL-KO make them - check their website http://www.al-ko.com.au/ and search for Land Rover.

Hubs:

443060 1450 kg Slimline 215mm 105mm Range Rover / LandRover Defender 6.5" PCD (5/8"
443050 1450 kg Slimline 215mm 105mm Undrilled
443055 1450 kg Slimline 215mm 105mm Land Rover 5 x 6.5" PCD
443100 1500 kg 1.5 tonne 205mm 105.5mm Undrilled
443230 1500 kg 1.5 tonne 205mm 105.5mm Land Rover/Defender 5 x 6.5" PCD
443220 1500 kg 1.5 tonne 205mm 105.5mm Land Rover 5 x 6.5" PCD
444100 2000 kg 2 tonne 205mm 105.5mm Undrilled
444230 2000 kg 2 tonne 205mm 105.5mm Land Rover/Defender 5 x 6.5" PCD
444220 2000 kg 2 tonne 205mm 105.5mm Land Rover 5 x 6.5" PCD
445210 3000 kg 3 tonne 205mm 105.5mm 5 stud Land 5 x 150mm PCD
445100 3000 kg 3 tonne 205mm 105.5mm Undrilled
445230 3000 kg 3 tonne 205mm 105.5mm Land Rover/Defender 5 x 6.5" PCD
445220 3000 kg 3 tonne 205mm 105.5mm Land Rover 5 x 6.5" PCD

One could use the undrilled units and have them drilled to fit. AL-KO also make wheel studs - even specials for Range Rover.

Ron

Thread: Landrover wheels on your camper

Thread Tools

Landrover wheels on your camper

hubs

Bookmarks

Bookmarks

Posting Permissions