Drop axle on caravan

Quote:

---

Originally Posted by Mick_Marsh

75 x 75 angle! I think that's what is on my van.
https://www.aulro.com/afvb/images/im...2015/03/83.jpg
https://www.aulro.com/afvb/images/im...016/12/363.jpg

Nup. More like 45 x 75.
Oh! Look at that bracing.

---

Look how short the drawbar is too. The shorter the bar, the less strong it needs to be :)

Quote:

---

Originally Posted by DoubleChevron

Look how short the drawbar is too. The shorter the bar, the less strong it needs to be :)

---

Yep. it doesn't concern me. It's lasted forty four years and it's in better condition than me.

yea,, but what isnt?:angel::p

Quote:

---

Originally Posted by Pedro_The_Swift

yea,, but what isnt?:angel::p

---

I hear your "Preferred Suppliers" list of beer is unusable.

its all this moving around---:mad:

Quote:

---

Originally Posted by Mick_Marsh

Notice the digital voltmeter in the seat box. That was my job for the day.
Perfect, isn't it.
http://www.aulro.com/afvb/attachment...n-dsc_5012.jpg

Also in the seat box is the battery and inverter.
http://www.aulro.com/afvb/attachment...n-dsc_5013.jpg

Up in the cupboard, near the external power connection socket is the switchboard.
It has a mains/inverter changeover switch and a ELCB that works in both circuits.
http://www.aulro.com/afvb/attachment...n-dsc_5011.jpg

Dave, if you're reading this, I'll draw a connection diagram and post it in your thread.

---

To the best of my memory, this is how the van was wired.
https://www.aulro.com/afvb/

Thanks Mick - very close. The neutral and active run through an RCD/MCB before going to the outlets.

Quote:

---

Originally Posted by bacicat

Thanks Mick - very close. The neutral and active run through an RCD/MCB before going to the outlets.

---

That is what that symbol means.
Yeah, ok, I'll tweak the diagram for those unfamiliar with AS 1102.107.

Ah, right. I thought there would have been a break in the neutral too.

For some industrial and mining applications, yes, but not for domestic.
You'll have noticed you would have wired one neutral conductor to the ELCB, or at least, most ELCBs only have one neutral conductor wired to them.