Thread: If Di and I can do it ----

Originally Posted by Lotz-A-Landies

I am well trained in backing using mirrors and have a HR licence myself, but I have never driven any heavy vehicle where the main mirrors were convex. Yes many have a secondary convex mirror for checking vehicles in your blind spot, but you don't use them for reversing the truck/trailer.

All I want is flat external mirrors on my D4.

Can't you get mirrors that you can strap on to your existing mirrors if the standard D4 don't help??

I don't feel the D4 mirrors are that bad, I know that the difference between the left and right can be a pain, because of the distance difference between them, but I think I've just gotten used to them, I back our trailer down onto a raised pad, there's not a lot of room to play with and there's a turn to get it up and onto the pad, I use a rock that stops the trailer from rolling away as my sight guide, also there's a pole I need to clear on the unsighted side I need to miss, took some practice to get it right though.

Baz.

Originally Posted by Redback

Can't you get mirrors that you can strap on to your existing mirrors if the standard D4 don't help??

I don't feel the D4 mirrors are that bad, I know that the difference between the left and right can be a pain, because of the distance difference between them, but I think I've just gotten used to them, I back our trailer down onto a raised pad, there's not a lot of room to play with and there's a turn to get it up and onto the pad, I use a rock that stops the trailer from rolling away as my sight guide, also there's a pole I need to clear on the unsighted side I need to miss, took some practice to get it right though.

Baz.

Both external mirrors on my D4 are convex.

It used to be a pain with the LHS convex but both convex is annoying. I guess its designed for school run mums who never back a trailer, but for me I'd swap both for flat in a second if I could.

Originally Posted by DiscoMick

I saw an instructional video on backing a semi which basically said to choose a spot on the trailer which was visible in the side mirror and use that as a guide. Keep the mark in the right place and you know you're going OK. If it moves out of focus then you're wrong. I do that with our camper trailer, which has to be backed through a single roller door to put it away. So far I haven't hit the garage.

Maybe you need to park the wife's Yaris behind the Garage What is it, twice now.

( i hope i have remembered the right Yaris owner )

So you supposed to look at some piece of stupid screen showing lines rather than just looking in your mirrors so you can see where it's going

There's nothign harder than backing a caravan into a shed .... mostly because your trying to back into a "black hole" and can't see a damn thing.

This is my answer:



90seconds work to slip the tongue onto the bullbar using two bolts. Being offset means you can see down the side of the caravan.... You can also see where your going as you put the headlights on high beam ... so your lighting up the "dark hole" that your pushing the caravan into

seeya,
Shane L.

Originally Posted by DoubleChevron

So you supposed to look at some piece of stupid screen showing lines rather than just looking in your mirrors so you can see where it's going

There's nothign harder than backing a caravan into a shed .... mostly because your trying to back into a "black hole" and can't see a damn thing.

This is my answer:



90seconds work to slip the tongue onto the bullbar using two bolts. Being offset means you can see down the side of the caravan.... You can also see where your going as you put the headlights on high beam ... so your lighting up the "dark hole" that your pushing the caravan into

seeya,
Shane L.

• Note 1. You have flat mirrors on both sides of that vehicle (unlike the D4)
• Note 2. If I fitted an additional front tow ball in that position I wouldn't be able to push the trailer into the black hole of a shed where they (3) are stored. There is only about 2.8m wide space (30m long) and one trailer is 2.5m wide.

Originally Posted by Lotz-A-Landies

• Note 1. You have flat mirrors on both sides of that vehicle (unlike the D4)
• Note 2. If I fitted an additional front tow ball in that position I wouldn't be able to push the trailer into the black hole of a shed where they (3) are stored. There is only about 2.8m wide space (30m long) and one trailer is 2.5m wide.

Front and center mount the towbar ... life doesn't need to be difficult. If it's a single axle trailer/van ... use a quality ratchet jockey wheel

I find towing mirrors not much use at all... the vibrate around to much to show you much other than there is "somone" beside the 'van.

Originally Posted by DoubleChevron

Front and center mount the towbar ... life doesn't need to be difficult. If it's a single axle trailer/van ... use a quality ratchet jockey wheel

I find towing mirrors not much use at all... the vibrate around to much to show you much other than there is "somone" beside the 'van.

Have you ever pushed a trailer or van 50 metres including up hill with a ratchet jockey wheel?

It is a 30 metre x 2.8 metre corridor between stored equipment and racking before I get to the 20 metres of space where I can store my stuff.

I can back well with flat mirrors and don't need the extension mirrors or a front ball, all I want is flat mirrors on my D4.

It used to be illegal to install convex mirrors on the drivers side of a vehicle. Why was that changed?

Originally Posted by Lotz-A-Landies

Have you ever pushed a trailer or van 50 metres including up hill with a ratchet jockey wheel?

It is a 30 metre x 2.8 metre corridor between stored equipment and racking before I get to the 20 metres of space where I can store my stuff.

I can back well with flat mirrors and don't need the extension mirrors or a front ball, all I want is flat mirrors on my D4.

It used to be illegal to install convex mirrors on the drivers side of a vehicle. Why was that changed?

I don't understand the problem ... Just change the mirror glass. You local glazier can probably cut you some flat mirror glass to fit.