Wild camper is born......

far out, you don't muck around!!!

looking good and coming together very quickly.

niiioooooocccccceeeeeee job mate

:twobeers:

Looking good...send the plans over when ya ready...i'll start on mine then...haha looks nice and strong...

Stu

Quote:

---

Originally Posted by WildOne

Well, after a little break from trailer building for various reasons:angel: i got stuck into it for the last couple of days, trailer build is now complete and have now taken it on it's maiden tow from Melbourne to Bendigo for a mate to give it a few coats of paint, and to return his Mig, damn i'm gonna have to buy one for myself....
Then to wire and plumb it up properly and start building the kitchen.

---

Quote:

---

Originally Posted by stuart

Looking good...send the plans over when ya ready...i'll start on mine then...haha looks nice and strong...

Stu

---

Plans???Who's got plans:D Will be interesting when i take it over the weigh bridge to get it registered.

Looks fantastic.

How did you go welding the galvanised beams? I was always told that it was dangerous (fumes are toxic).

Did you just spray the welds afterwards with cold-galv?

Quote:

---

Originally Posted by spudboy

Looks fantastic.

How did you go welding the galvanised beams? I was always told that it was dangerous (fumes are toxic).

Did you just spray the welds afterwards with cold-galv?

---

Yeah, fumes are toxic, need to ensure good ventilation when welding galvanised beams, also, to ensure good penetration and an even quality weld, you need to grind the galvanising off in the immediate weld area. This helps with fumes. In my case i leave the shed door open and set up a fan to help with air circulation.
Sprayed all the welds on the chassis with cold galv, the trailer is now going to be etch primed and then painted with a grey hammerite finish paint. So should be easy to touch up in the future.

NICE WORK:cool::cool::cool::cool:
Did you go with brakes????
You will need them if you want to carry anything,mine is 580kg empty with 2 spare wheels,licenced to 2000kg.
Did you find it bounces unladen? mine does a bit more than Im happy with,but soon as it gets any weight its no problem at all.
The Mrs had somebody looking at it the otherday,wanted to know where I bought it as they want one:cool::cool::cool::cool::cool:,she told them to call in when the Black Disco is home.
Also an older gent driving a D1 asked was it a real Landy trailer when I was getting fuel with it hitched up,I said you bet it is its a LandyAndy Trailer:D:D:D:D:D:D:D:D.
Keep up the great work,keep the pics coming.
Nothing like the satisfaction of doing it yourself.
ENJOY
Andrew

Quote:

---

Originally Posted by WildOne

Plans???Who's got plans:D Will be interesting when i take it over the weigh bridge

Quote:

---

to get it registered

---

.

---

:eek:how did you take it to drop off the welder if its not registered ????

cheers

ps l know it sounded like a stupid question ....but it wasnt....befor the peanut gallery start :p

Quote:

---

Originally Posted by cucinadio

:eek:how did you take it to drop off the welder if its not registered ????

cheers

ps l know it sounded like a stupid question ....but it wasnt....befor the peanut gallery start :p

---

The same way i'm going to take it to Vic Roads for an inspection, behind the Disco of course:angel:

Quote:

---

Originally Posted by WildOne

The same way i'm going to take it to Vic Roads for an inspection, behind the Disco of course:angel:

---

:D really !!!.:p..shows how much of a chicken i am ;) guess I'm just scared of cops..lol...l would have gone and got a permit to take it to the check ...:(


cheers