wheel bearings, brakes, recently painted chassis maybe hiding good/bad repairs would be some of the main things. The usual lights and simple/cheap things to repair.
Paul
Hey guys
as the title says if your going to inspect a second hand trailer...what would be the things to look out for
The trailer in question is a hard floor camper, off road model.
but i'm sure this info will be helpful to others that may one day find them selves in the same situation.
Lou
Our Land Rover does not leak oil! it just marks its territory.......
wheel bearings, brakes, recently painted chassis maybe hiding good/bad repairs would be some of the main things. The usual lights and simple/cheap things to repair.
Paul
Any rust hidden up underneath?
Is it watertight? Are the seals OK? Suggest you get a hose and blast it when closed, then open it up and blast it again and then inspect for water entry.
What kind of brakes? Are they OK?
Does it track straight when towed?
Are the frame, suspension etc strong enough for rough roads?
Is the weight OK for towing with your vehicle?
Who made it? Are parts available?
In addition to the above - look at a couple of examples of the trailer to check what they look like - take photos to help the memory. Check what the trailer looks like connected to your car - should be level - both front to back and side to side. When you do this it will be easier to check for a bent drawbar.
I would also recommend that for any second hand trailer you buy that you repack the bearings and fully check the brakes before going anywhere. Check the age of the tyres (should be printed on the tyre these days) - trailer tyres are ususally second hand and negelected. A mate bought an off road caravan travelled 60 km and burst 2 tyres as they were 10 years old.
Get underneath and look around - collections of dirt (rust), that all the brake parts work and do not intefere with anything and that things look straight. Spings should have reasonable clearance and the axle should be straight.
If there are any fittings eg anderson plugs, gas etc, make sure that they work.
Hope that helps
Check the condition of the canvas and frame work holding the canvas, zippers, stitching, check for holes, and don't forget the other parts of the canvas work, the addons like annex and walls and that all the poles are there too.
Check electrics, LIKE power points for 240V and 12V are OK as well as conections.
Cheers Baz.
2011 Discovery 4 SE 2.7L
1990 Perentie FFR EX Aust Army
1967 Series IIa 109 (Farm Truck)
2007 BMW R1200GS
1979 BMW R80/7
1983 BMW R100TIC Ex ACT Police
1994 Yamaha XT225 Serow
| Search AULRO.com ONLY! | 
    Search All the Web! | 
  
|---|
| 
 | 
 | 
Bookmarks