Thread: A member of the camper trailing gang :)

The hubs will almost certainly be ALKO hubs. get on the ALKO site and see which ones they are.

If like my Camp'o'matic , which predates the Aussie Swag tieup, they will be parallel bearing with electric brakes.

You can buy blank hubs and have them drilled by any competent engineering shop. If you want to use mags DO NOT HAVE ALKO SUPPLY LR PATTERN, as although the pattern will'may be correct the studs will be AF not metric. If you want to use mags you have to buy LR studs or similar and if you get ALKO to supply them drilled, be aware that the hole for their studs is bigger than the hole for LR studs. ( I know all this from bitter experience)

I have never carried a spare hub and I cannot think of any circumstance that you would. Who would ever carry a car spare hub?

Regards Philip A

Originally Posted by dullbird

no why what happened?

Sharp rocks ... can't do much when they go through the side wall.

I just took a second tyre off the rim... Glad I did - looks like maybe I should have taken 2

Nice rig by the way DB...

Mark

thanks mate... having a few hiccups trying to get it registered..

but once it is will be changing lights etc...have them here ready but just want it registered first and then we are going to have a crack at having the hubs swapped over

really would like to change the catches to flush ones also..dont know if thats possible but we are going to look into it...I think it will make the trailer look quite different