Thread: land rover series 3. seat patterms

Originally Posted by cyberrob

hi i need to know the base dimensions of the front 3 seats and the 3 backs does any one know them I need to make them up

The backs are a steel pressing, bases are plywood, some have a frame around the base.
I'll have to check dimensions (I made some bases recently). I did find that if you had an adjustable seat the base needed to be a slightly smaller dimension.

Colin

Seat bases.
Fixed outer 18" wide X 17 3/4"
Adjustable outer 18" wide x 17 1/4"
Centre 15" wide x 17 3/4"

If you have the original frames for the bases the sizes will need to be adjusted to fit. Both my Series III's have the frame around the base and the material is folded round this then metal clips hold it in position.




I'll measure the backs when I get a chance.


Colin

If you're ever in Melbourne I have a set of new deluxe bases and second hand backs I'm looking to sell.

cheers

Thanks for the info !

Thanks I bought a second hand set from a local for only $50 they need new foam, vinyl, etc but the frames are good.