Puddle on the floor

**ugu80** · 3rd April 2010, 12:06 PM

Close vents. Apply duct tape to top. Open if hot. Close if wet.

**carvin** · 3rd April 2010, 02:45 PM

I sika flexed the seal between the bottom of the winscreen and top of the firewall. fixed that leak. I masked above and below the seal, then applied the sika flex. Its a pain to remove sika from where you don't want it. At least with the tape any excess gets peeled away when you remove the masking tape. P.S if you haven't used sika flex before have a bucket full or rags handy!

**disco2hse** · 4th April 2010, 05:15 AM

Originally Posted by carvin

I sika flexed the seal between the bottom of the winscreen and top of the firewall. fixed that leak. I masked above and below the seal, then applied the sika flex. Its a pain to remove sika from where you don't want it. At least with the tape any excess gets peeled away when you remove the masking tape. P.S if you haven't used sika flex before have a bucket full or rags handy!

Or you could use some turps

**carvin** · 4th April 2010, 06:33 AM

i could have used wax and grease remover as well. i find you get a better result with the tape, as long as you remove it before the sika skins to much.

Thread: Puddle on the floor

Thread Tools

Bookmarks

Bookmarks

Posting Permissions