Thread: breaker breaker.....

Hi traicutter,
I used the nipples on the passenger side of the engine bay, pushed the wire through. then under the passenger leg area is a removable panel, this will give you direct access to the firewall directly beneath the wire entry point. If you can get someone to wiggle the wire around you can easily locate it and grab with some longnose pliers. Then its just a case of running the wire behind the das and under the rubber matting. just remember to do all the cable running before you solder on the connection. Makes it alot easier.

Originally Posted by sooly

Hi traicutter,
I used the nipples on the passenger side of the engine bay, pushed the wire through. then under the passenger leg area is a removable panel, this will give you direct access to the firewall directly beneath the wire entry point. If you can get someone to wiggle the wire around you can easily locate it and grab with some longnose pliers. Then its just a case of running the wire behind the das and under the rubber matting. just remember to do all the cable running before you solder on the connection. Makes it alot easier.

stuck my noggin into the removable panel,,,,,, candy from a baby ...cheers mate.