Results 1 to 8 of 8

Thread: headlights u/s

  1. #1
    Join Date
    Sep 2008
    Location
    Perth W.A.
    Posts
    1,863
    Total Downloaded
    0

    headlights u/s

    I have an emergency issue my headlights do not work and I need to get them sorted pronto, I tried sticking new bulbs in the dash as they were ....well like a land rover and dim like land rovers dashes are .....didn't disconnect the battery my error,head lamp bulbs good (not blown) any top hints appreciated.....p.s. the switch seems ok as well !!!!

  2. #2
    Join Date
    Nov 2008
    Location
    where every one holidays, sunny coast
    Posts
    1,712
    Total Downloaded
    0
    iv just had this prob to,, was my relay for the head lights under the dash,, i think it was the 2nd from the right, pulled it out ad it was all corroded and that, cleaned it shuv it back in and alls good,

  3. #3
    dmdigital's Avatar
    dmdigital is offline OldBushie Vendor

    Gold Subscriber
    Join Date
    Jun 2006
    Location
    Arnhem Land, NT
    Posts
    8,492
    Total Downloaded
    0
    Sorry if this is obvious but I know a few others who have fallen for this: Do you have the ignition on when trying the checks on the lights?

    Check the fuses carefully, there could also be corrosion there. I had this problem in my Tdi.

    The switch would have been my first thought and it may pay to put a test light across the terminals and double check. They can look OK but still be internally stuffed.

    Is the bulb on the instrument cluster illuminating when the switch is on? It could be this is not connected properly or is blown. I don't know if this in series with any of the light circuit or in parallel.
    MY15 Discovery 4 SE SDV6

    Past: 97 D1 Tdi, 03 D2a Td5, 08 Kimberley Kamper, 08 Defender 110 TDCi, 99 Defender 110 300Tdi[/SIZE]

  4. #4
    Join Date
    Sep 2008
    Location
    Perth W.A.
    Posts
    1,863
    Total Downloaded
    0
    Quote Originally Posted by stig0000 View Post
    iv just had this prob to,, was my relay for the head lights under the dash,, i think it was the 2nd from the right, pulled it out ad it was all corroded and that, cleaned it shuv it back in and alls good,
    My relays are good had those out yesterday arvo in the car park at work ...just cant leave the place and all that....cheers but.

  5. #5
    Join Date
    Sep 2008
    Location
    Perth W.A.
    Posts
    1,863
    Total Downloaded
    0
    Quote Originally Posted by dmdigital View Post
    Sorry if this is obvious but I know a few others who have fallen for this: Do you have the ignition on when trying the checks on the lights?

    Check the fuses carefully, there could also be corrosion there. I had this problem in my Tdi.

    The switch would have been my first thought and it may pay to put a test light across the terminals and double check. They can look OK but still be internally stuffed.

    Is the bulb on the instrument cluster illuminating when the switch is on? It could be this is not connected properly or is blown. I don't know if this in series with any of the light circuit or in parallel.
    Maybe I have partially blown the switch I have an old one that I can try out this arvo ....I test my lights with the engine running, always just to make sure
    I took out every single fuse yesterday all good (again just to make sure and I am well aware that 85% of the fuses have no bearing on the lights state of play.)
    The instrument panel works, these are the bulbs I changed and suspect caused my issues, I reverted back to the original set up to see if it had any impact.
    It can only be the switch or the relay I guess or an earth but as nothing has changed to affect the earth I dont see how.
    Thanks for your input, Andy

  6. #6
    Join Date
    Feb 2008
    Location
    South Africa
    Posts
    88
    Total Downloaded
    0
    I had a similar issue with my TD5. Turned out to be a silly plug thing in the dash behind the radio. Basically this plug takes one wire and splits it into many!
    This needed to be replaced and I didnt have problems again.

  7. #7
    Join Date
    Sep 2008
    Location
    Perth W.A.
    Posts
    1,863
    Total Downloaded
    0
    Any pictures at all????

  8. #8
    landroverwa Guest

    Headlight problems

    Can you still 'flash' the headlights with the indicator stalk and does the high beam 'blue' warning light on the dash come up when you do so?

    I had a problem in my Defender where the headlight switch would turn park lights on at 1st position but 2nd position wouldn't turn headlights on.... therefore thought I had a faulty headlight switch.

    However, if the headlight switch was left on and the 'high beam flash' was pulled in on the indicator stalk, the headlights would then remain on in low beam when the stalk was released.

    The auto elect diagnosis was that the indicator stalk when pulled in against the spring loading actually 'flashes' low and high beam together and it was faulty contacts in the indicator stalk causing the low beam problem so the stalk had to be replaced - nothing wrong with the headlight switch itself.
    Good luck!
    landroverwa

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!