Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: Ls1 Manual-Defender?

  1. 29th January 2011, 12:19 AM #1
    datman Guest

    Ls1 Manual-Defender?

    Have been trolling the net for weeks trying to find info on putting an Ls1 into my 110. The info I'm after is what gearbox and transfer was used if not the factory stuff, and how it was mated to the motor if it was factory or otherwise. I'm after a manual. If any one has done this, or seen it done could you point me in the right direction.
    I know this is a touchy subect for some, I have read though enough forums in the last week to see that, so opinions are expected but useful information would be appreciated greatly.

    Cheers
    Reply With Quote Reply With Quote
  2. 29th January 2011, 12:45 AM #2
    cal415's Avatar
    cal415
    cal415 is offline ChatterBox Supporter
    Join Date
    Jan 1970
    Location
    Stockton, NSW
    Posts
    2,769
    Total Downloaded
    0
    Have a read of this, i used a GQ patrol 5 speed and a lt230, seems to all go together well enough, tho i havnt got it rolling yet.
    http://www.aulro.com/afvb/members-ri...85-county.html

    Reply With Quote Reply With Quote
  3. 30th January 2011, 07:03 PM #3
    datman Guest
    Very nice cal,just finnished reading the whole thing.
    So its nice to know you think the rover transfer is strong enough. I am going to quiz an engineer to see if I can get a new output shaft made for the t56 gearbox. If I get a nod will check on price for making a batch. Was starting to think I was going to have to change the rear diff as well or use an aftermarket transfer, but then all the stuff i could find was set up for cruisers.

    Cheers
    Reply With Quote Reply With Quote
  4. 31st January 2011, 12:52 AM #4
    cal415's Avatar
    cal415
    cal415 is offline ChatterBox Supporter
    Join Date
    Jan 1970
    Location
    Stockton, NSW
    Posts
    2,769
    Total Downloaded
    0
    i would love to have gone the t56, im still keeping an eye out for a dead one to play with, let me know if you have any luck with mating it up to the LT230

    Reply With Quote Reply With Quote
  5. 31st January 2011, 01:31 PM #5
    datman Guest
    Yes thats what i am thinking, getting a dead t56 and dead r380 box/ transfer. Maybe if I dim the lights and put on some mood music they will "hybridise" themselves.
    Searching on the net, the t56 to transfer seem to be the holy grail that heaps of blokes are after. They dont even offer it in the chev range.
    Have seen a couple of pics that a guy did himself. The problem seems to be the extension housin on the regular t56 houses the reverse gear, unless you want to pay for the corvette box which is different, and would be alot easier to convert.
    Time to call in for some favours for some dead gearboxes.

    Cheers, Jonesy
    Reply With Quote Reply With Quote
  6. 6th February 2011, 08:47 PM #6
    datman Guest
    Vt commadore secured with Ls1 and t56 6 speed gearbox. Now all i have to do is clear another 2 datsuns out of the shed to fit it in.
    What am I doing?
    Reply With Quote Reply With Quote
  7. 6th February 2011, 08:49 PM #7
    tuffrangie
    tuffrangie is offline Master
    Join Date
    Feb 2007
    Posts
    122
    Total Downloaded
    0
    Apparently these guys do a t56 to lt230 conversion:

    http://www.rakeway.com/

    Rob
    Reply With Quote Reply With Quote
  8. 6th February 2011, 10:26 PM #8
    datman Guest
    Cheers Tuff.
    Reply With Quote Reply With Quote
  9. 6th February 2011, 10:55 PM #9
    cal415's Avatar
    cal415
    cal415 is offline ChatterBox Supporter
    Join Date
    Jan 1970
    Location
    Stockton, NSW
    Posts
    2,769
    Total Downloaded
    0
    Hmmm i believe they only do a TKO 5 speed to LT230 not a t56.... went down that path a while back...

    Reply With Quote Reply With Quote
  10. 7th February 2011, 02:12 PM #10
    datman Guest
    It looks like they have a "remote" input shaft with a flange that might be suitable. How well is the transfer on the 110's mounted? do you think a stand alone transfer is a good idea? It should only be a couple of inches between the front of the transfer and back of the t56 if i get a similar flange arrangement for the out put of the gearbox.
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« 255/100-16 Tyres | Bilsteins »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!