yep the extra load on the circuit is making it think there is a trailer hooked up
a few guys fit lower wattage bulbs
G'day All,
First query re new Puma:
I've noticed this morning that each time I use the indicator (both left and right) the 'trailer connected' light flashes.
I had an ARB bar fitted yesterday and they hooked into the wiring to the indicator lamps. Might this be the source of the problem?
Any clues?
yep the extra load on the circuit is making it think there is a trailer hooked up
a few guys fit lower wattage bulbs
Thanks Weeds. I'll give it a go.
Or fit LED globes to the bar or body lights (not both though).
The body light globes are forward facing so LEDs will fit there OK.
Scott
Same thing happens to my new Puma 90 fitted with factory tow bar, but only when the hazzards are on. I assumed this was normal?
It's supposed to flash just once without a trailer, if its flashing after the first flash, then the bull bar needs a smaller wattage globe.
Roo bar loads up the circuit, and system thinks its a trailer. Recently had the bar off then back on the 130 and proved this point. Personally, I leave it as it is since I usually busy ensuring that the indicators self cancel, or not.
What is also interesting, if you lose one of the bulbs (even the bar) the flasher indicates at double time....giving you notice to replace a bulb!! I had an altercation with an errant shrub....the 130 won but the shrub removed the roobar harness to indicator loom splice to spite me. Bugger!
aew849
P.S. Series 3's had a similar set up, the trailer light was centre bulkhead.....
Last edited by aew849; 25th March 2011 at 11:44 AM. Reason: Add S3 info
My 96 D1 did it from the day I had an ARB bar fitted.So I'll try LED bulbs and see if that fixes it.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks