Thread: 110 tail gate

Since you have a standard tub then a series II/III tailgate will fit.

If you want a swing open type, then you will need to make it, or modify a standard tailgate. The easiest way would be to weld up an RHS frame with a lip welded on to sit against the seal. Then pop rivet an aluminium sheet to the frame.

Hinges - either use 110 wagon hinges (x2) or any others that will fit.

My preference would be to make one and also incorporate a spare wheel carrier (and beefed up hinges).



edit - I see you already have the hinges...

thanks the tub was off a wagan and i think it has hinges on the side of it. it is the same size as a 110 back dor. do you think it will have enough strength to hold a spare wheel.

Originally Posted by lndrvrboy

thanks the tub was off a wagan and i think it has hinges on the side of it. it is the same size as a 110 back dor. do you think it will have enough strength to hold a spare wheel.

It can't be from a wagon (5 door), but may be from a "hardtop" which are 3-door.

The door/tailgate openings are all the same size - from 1958-2004 at least (and maybe also 2004-current).