Results 1 to 5 of 5

Thread: New drag link or just ball joints?

  1. 27th May 2011, 01:17 PM #1
    SimonM's Avatar
    SimonM
    SimonM is offline Master Subscriber
    Join Date
    Feb 2010
    Location
    Deloraine, TAS
    Posts
    924
    Total Downloaded
    0

    New drag link or just ball joints?

    I have taken off the drag link due to both drag link ends joints needing replacing, boots split and excessive play. New steering damper is on the cards too.

    Is there much benefit in upgrading to a HD drag link and new end joints or just stick with old bar and new ball joints?

    The 130 has 300,000k's on it so I know it will need money spent on it, much of which is being spent this week it would seem. I plan to keep it for a long time and set it up as my tourer, so happy to spend the money to get it up to scratch.

    Cheers
    Simon

    95 Defender HCPU 130
    Reply With Quote Reply With Quote
  2. 27th May 2011, 02:51 PM #2
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,510
    Total Downloaded
    0
    If you mean the drag link from the steering box to the LH swivel, I would not bother unless it is bent, or you can't get the ends out. I bent the track rod on mine (replaced with a HD) hitting a bump, but the drag link was unaffected, so I don't think it is likely to bend unless you hit something with it.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  3. 27th May 2011, 02:59 PM #3
    SimonM's Avatar
    SimonM
    SimonM is offline Master Subscriber
    Join Date
    Feb 2010
    Location
    Deloraine, TAS
    Posts
    924
    Total Downloaded
    0
    G'day John,

    That's the one.
    Simon

    95 Defender HCPU 130
    Reply With Quote Reply With Quote
  4. 29th May 2011, 02:52 PM #4
    SimonM's Avatar
    SimonM
    SimonM is offline Master Subscriber
    Join Date
    Feb 2010
    Location
    Deloraine, TAS
    Posts
    924
    Total Downloaded
    0
    Track rod off as well and the rear A-frame joint to come. Looks like the previous owner has replaced the passenger side tie rod ends not long ago with a new greasable unit but the drivers side needs replacing. They are a bugger to get off. Have them soaking now and see if that works.
    Last edited by SimonM; 29th May 2011 at 02:57 PM. Reason: Add detail
    Simon

    95 Defender HCPU 130
    Reply With Quote Reply With Quote
  5. 29th May 2011, 06:37 PM #5
    clubagreenie's Avatar
    clubagreenie
    clubagreenie is offline TopicToaster
    Join Date
    Dec 2007
    Location
    Sydney, you know. The olympic one.
    Posts
    4,853
    Total Downloaded
    0
    Just as a comparison for std track rods/drag links, on a D2, the cost of the parts is greater than buying the whole assy. By a lot.
    Reply With Quote Reply With Quote
« Photos of Air con install, 200 or 300TDI? | Aligning doors »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!