Reply With QuoteSuggestion - if you jack up the back by the chassis on stands so the wheels are clear of the ground, and then jack up one wheel by the axle; if the jack is suddenly released you should be able to produce the noise and track it down.
John
Fossicker
cheers blokes have looked at all said now, no sway bar on rear, no gear moving around, mine has been cut into a ute with drop down tail gate so its not rear door. if its shocks i should be able to flex it up and see how far they go down in stroke and work out wether thats it shouldent i ?
RoverLord
Suggestion - if you jack up the back by the chassis on stands so the wheels are clear of the ground, and then jack up one wheel by the axle; if the jack is suddenly released you should be able to produce the noise and track it down.
John
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
Wizard
Yes, you could measure it without much trouble.Originally Posted by deff1
cheers blokes have looked at all said now, no sway bar on rear, no gear moving around, mine has been cut into a ute with drop down tail gate so its not rear door. if its shocks i should be able to flex it up and see how far they go down in stroke and work out wether thats it shouldent i ?
Allan
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks