Thread: ECU protection when fitting a towbar

Originally Posted by karlz

OK, so now I understand. There is a socket on the RHS cross member where that square plug, plus into. Would have thought that part would be cheap enough.

Close. The socket isnt in the crossmember, its up the right hand chassis rail a bit.

Originally Posted by MrLandy

My trailer socket is above cross member just behind the flap covering tail light fittings.

Same here. I accessed it from under the vehicle. Reaching last the crossmember up to behind the stop/tail/turn lamps. A good torch helps... (And of course since I was removing the wiring already installed I just had to follow the wires to find where to disconnect the tail )