Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: TD5 accelerator problem

  1. #1
    Join Date
    Mar 2010
    Location
    Cairns
    Posts
    82
    Total Downloaded
    0

    TD5 accelerator problem

    Defender TD5 2005

    As I go up the gears, the revs stay up longer then usual when i depress the clutch, so when the next gear is engaged the revs are still too high. I have to pause in neutral for a couple of seconds to let the revs come down.

    The computer found the following faults:

    The ABS fault code memory contains no codes for current faults -: but does contains faults codes for the following intermittent faults - :
    02,1 : PWM SIGNAL FAILIURE FROM ENGINE ECU, (FIRST OCCURRENCE)

    The TD5 fault code memory contains codes for the following faults -:
    (10,1) AIR CONDITIONING FAN DRIVE OPEN LOAD, (LOGGED)
    (10,3) TACHOMETER DRIVE OPEN LOAD, (CURRENT).
    (10,4) GEARBOX / ABS DRIVE OPEN LOAD, (LOGGED).

    The computer faults where cleared and the contacts on the accelerator pedal where clean but the problem persists.

    ANY IDEAS PLEASE and thank you on my behalf and the mechanic's as well.

  2. #2
    Join Date
    Aug 2011
    Location
    Stanwell Park, NSW
    Posts
    1,667
    Total Downloaded
    666.1 KB
    Hi Applemac

    Have you checked the wiring harness plug to your ECU? TD5's have a well known defect of oil migrating up the injector harness fouling the plug to the ECU which in turn can cause problems with injection and other engine management parameters. Real bad cases of migration will find oil in the ECU.

    Clean the plug and pins at the ECU with silicon spray or WD40, dry with compressed air and see if that fixes the problem. It won't be a permanent fix. Oil already in the harness will fill the plug soon enough. There are plenty of posts on the forum about the oil in harness problem. Some advocate sealing the injector harness under the rocket cover, some say the oil migrates up the twisted wires therefore a futile exercise.

    If you find the cause of the problem, post it so the rest of us can learn from your experience.

    cheers MLD

  3. #3
    Join Date
    Jul 2011
    Location
    Yarrawonga, Vic
    Posts
    6,568
    Total Downloaded
    0
    I think its the clutch switch.

  4. #4
    Join Date
    Mar 2010
    Location
    Cairns
    Posts
    82
    Total Downloaded
    0
    Quote Originally Posted by MLD View Post
    Hi Applemac
    If you find the cause of the problem, post it so the rest of us can learn from your experience.

    cheers MLD
    I will certainly keep everyone posted on the outcome.

  5. #5
    Join Date
    Mar 2010
    Location
    Cairns
    Posts
    82
    Total Downloaded
    0
    Quote Originally Posted by goingbush View Post
    I think its the clutch switch.
    Somehow I had a feeling about something to do with the clutch, it seems that when the clutch is fully depressed the revs come down.
    I'll have to suggest it to the mechanic.

  6. #6
    Join Date
    Mar 2010
    Location
    Cairns
    Posts
    82
    Total Downloaded
    0
    Quote Originally Posted by MLD View Post
    Hi Applemac

    Have you checked the wiring harness plug to your ECU? TD5's have a well known defect of oil migrating up the injector harness fouling the plug to the ECU which in turn can cause problems with injection and other engine management parameters. Real bad cases of migration will find oil in the ECU.

    Clean the plug and pins at the ECU with silicon spray or WD40, dry with compressed air and see if that fixes the problem. It won't be a permanent fix. Oil already in the harness will fill the plug soon enough. There are plenty of posts on the forum about the oil in harness problem. Some advocate sealing the injector harness under the rocket cover, some say the oil migrates up the twisted wires therefore a futile exercise.

    cheers MLD
    The Harness is clean, no problem there.
    I also checked the relays.

  7. #7
    Join Date
    Mar 2010
    Location
    Cairns
    Posts
    82
    Total Downloaded
    0

    How to disconnect Clutch Switch ?

    IMG_5916.jpg
    Quote Originally Posted by applemac View Post
    Somehow I had a feeling about something to do with the clutch, it seems that when the clutch is fully depressed the revs come down.
    I'll have to suggest it to the mechanic.
    Mechanic agrees that it could well be the Clutch Switch causing the problem, he suggested disconnecting it to see if the problem disappears.

    To make sure I'm disconnecting the right thing, can anyone tell me if this is the right one ?
    Last edited by applemac; 4th February 2012 at 10:28 AM. Reason: image

  8. #8
    Join Date
    Jul 2011
    Location
    Yarrawonga, Vic
    Posts
    6,568
    Total Downloaded
    0
    Yes that is the clutch switch,
    Not sure but I think you have to turn it off in the ECU using a nanocom etc.

    You can just try disconnecting it , if nothing happens put a link in there & short it out.

    there is something else on it here.

    Clutch switch and throttle response

  9. #9
    Join Date
    Mar 2008
    Location
    Perth, WA
    Posts
    1,947
    Total Downloaded
    0
    I know this sounds strange, but check the fuse for the brake lights. It's a bit of a odd one, but with the TDCi if you blow the brake light fuse the symptoms you have described occur, (I'm not sure if the TD5 will do the same thing...).

  10. #10
    Join Date
    Mar 2010
    Location
    Cairns
    Posts
    82
    Total Downloaded
    0

    BINGO.....

    Quote Originally Posted by goingbush View Post
    Yes that is the clutch switch,
    Not sure but I think you have to turn it off in the ECU using a nanocom etc.

    You can just try disconnecting it , if nothing happens put a link in there & short it out.

    there is something else on it here.

    Clutch switch and throttle response
    As I disconnected it the plug was covered in clutch fluid, it even dripped.
    I think it's safe to say that we've found the problem.

    Thanks everyone

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!