-
12th March 2012, 09:06 AM
#1
Ok So I am an x Accountant
Hello
Simple or should be question.I am trying to remove the two small plastic panels that hold the rear speakers in a 2010 station wagon. Does anyone know
what type of screw and size it is ?.
I have tried just about every size torque screw driver I can find but nothing seems to fit or at least turn the screw.
Cheers
Tony
-
12th March 2012, 09:23 AM
#2
The screw is just a plastic, quarter turn job (don't know the size off the top of my head). But the real trick is the double-sided tape that holds the other end.
Here is a link to a really old thread when I upgraded my rear speakers...
-
12th March 2012, 09:34 AM
#3
Just done mine last night. I put a small screw driver under them to lift them up a bit. Then turned them with a good pair of pliers and as I turned the screw I also pulled it , came out no problems. I, like you could not find a driver to turn it. When reinstalling just give them a tap and they will go back in. Watch the little inserts that the screws go into.
Lindsay.
-
12th March 2012, 10:04 AM
#4
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks