Thread: MY11 90 Special Edition and long range tanks

I was going to use the original filler but it's a PITA running it past the wheel,the quarter panel filler will be an easy way to do it and with a chequer plate piece under it will look good too. Pat

Originally Posted by bigmac

I had a guy in Brisbane make a tank for me that fits under the sill He didn't have to remove the side step only the bracket that goes to the chassis.
He then welded an angle on the step suports and another on the chassis.
The tank holds 43lts. with about 41.5 useable.
He only made and fitted the tank and I done the rest pipe work and pump.
As mine was the first he has done it took him about 4hrs to fit but now he knows what to do he thinks about 2hrs to fit. It took me about 2hrs to work out the pipe work and about 4 days to work up the courage to cut a hole in the limited edition 90.

Bigmac

Yes Sue my 90 is the same as yours.
I had it done through FWD Motors at Yerongpilly as the guy that makes it needs a hoist to fit it as he has to do some welding.
The only thing is you have to get a pump, hoses and filler and fit it yourself or get someone to do it for you. Mine cost aound $900 by the time I finished. The tank cost $520 to make.
PM me if you want more info

bigmac