Hi Matthew,
I had a similar problem in a single cab 130 Defender. The shuddering stopped after replacing the A Frame ball joint and rear suspension bushes.
Greg
HI ALL
When I take off and ease out the clutch the car shudders until I start to speed up also the clutch feels like nothing , it doesn't slip at all . The clutch and thrust bearing are about 2 years old , so can any one give me advice with fixing this SHUDDERING problem please .
Hi Matthew,
I had a similar problem in a single cab 130 Defender. The shuddering stopped after replacing the A Frame ball joint and rear suspension bushes.
Greg
I second a frame ball joint, mine had a big shudder through but once I change ball joint and all bushes drive like new(when it goes)
The problem can come from a variety of causes, often with several contributing. But the most likely is a dragging handbrake, either incorrectly adjusted, sticking expander, or full of dirt or oil (or both).
John
John
JDNSW
1986 110 County 3.9 diesel
1970 2a 109 2.25 petrol
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks