- 
	
		
                        
                                
                                        
                                                11th August 2012, 04:08 AM
                                        
                                
                                
                                        
                                                #1
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
		
			No power from OBD !
		
 
			
				
					Hi, 
 
 just got my nanocom. yesterday it works just as it should be in my pc but it seem my socket in my td5 defender has no power ! It was located out side the cabin just below the cubby box so i tried to clean it but no luck .
 I also checked the fuses no 8 and no 5 ( engin box) its just fine ! . The socket has 5 wires i believe the purple should have 12 volt but mine has no power . So i tried to hot wire it from fuse no. 8 and it works but it seems it doesnt interact with ECU and it couldnt read the fault or any other !!
 
 any advise
 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                11th August 2012, 07:15 AM
                                        
                                
                                
                                        
                                                #2
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					Does your internal light work? its on the same fuse
				 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                11th August 2012, 08:01 AM
                                        
                                
                                
                                        
                                                #3
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					No problem with the lights , it works
				 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                11th August 2012, 08:39 AM
                                        
                                
                                
                                        
                                                #4
                                        
                                        
                                        
                                
                        
		 
 
 
- 
	
		
                        
                                
                                        
                                                11th August 2012, 11:47 AM
                                        
                                
                                
                                        
                                                #5
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					
	
		
			
			
				
					  Originally Posted by  hghareeb
 Any thoghts !! 
 
 
 Check for Chafed loom back to the ECU then the ECU plugs and Earth points.
 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                12th August 2012, 01:36 AM
                                        
                                
                                
                                        
                                                #6
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					Well i believe the only remaining thing to do is to trace the black loom that goes out of the ECU to somewhere , the obd socket is out of this cable but it seem its very hard to trace it  and i can see no thing wrong with it from outside . and i can see no thing wrong with it from outside .
 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                12th August 2012, 08:12 AM
                                        
                                
                                
                                        
                                                #7
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
		
			
				
					To be honest I dont really understand your post 
 Quote " It was located out side the cabin just below the cubby box so i tried to clean it but no luck ."
 
 Are you saying the OBD plug has been relocated ?
 Do you have a copy of RAVE with a wiring diagram?
 
 The wiring of the diagnostic socket is not complicated so it should be relatively easy to fix
 
 If you dont have a wiring diagram I might be able to email you one
 
 
 
 
 
 
- 
	
		
                        
                                
                                        
                                                13th August 2012, 01:31 AM
                                        
                                
                                
                                        
                                                #8
                                        
                                        
                                        
                                
                        
		 
 
		
		
		
				
				
					
				
		
			
				
					Thank "djam1" for trying hard to understand my weak english . 
 
 yes the socket was relocated for some reason outside the cabin, i already had a look at the RAV CD accordingly i found that the purple wire in the socket should have 12vlt. power while mine has no power .
 
 the wires should be disconnected in the middle between the fuse box and the socket !! I ended up today to hotwire it from the fuse box to the socket and try to connect my friend ( Autologic) diag. Device and see if it read or not .
 
 thank yoy for your help.
 
 
 
 
 
 
 
	
	
	
	
	
	
	
	
	
	
	
	
		
		
		
		
			
				 Posting Permissions
				Posting Permissions
			
			
				
	
		- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-  
Forum Rules
 
			 
		 
	 
 
  
    | Search AULRO.com ONLY! 
 | Search All the Web! 
 | 
  
  
  
Bookmarks