Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Flyscreen insert for sliding windows D110

  1. #1
    Lost in Suburbia Guest

    Flyscreen insert for sliding windows D110

    So summer is coming and Deefa is warming up in the back to the extreme. Window tinting is done but need some other ideas for preventing it from turning into an oven.

    I thought, maybe, someone might know of an "off-the-shelf" retro-fit fly screen for the rear sliding windows. Ideally I'd like to put something on em that could be left open and the local toe-rags would struggle to get in.

    Any sugegstions or alternatives welcome.

  2. #2
    Join Date
    Jan 2009
    Location
    Samford
    Posts
    704
    Total Downloaded
    0
    I've thought of making something like this for the sliding rear window on my dual cab (same as the wagon side windows) or perhaps for the wind up rear windows. I was thinking fine security mesh with an edge the thickness of the glass so it sits in the track, and a section of window track on one end so that the window slides into it and locks it in place.

    Another job for the list......

    James.

  3. #3
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    2,972
    Total Downloaded
    0
    A cheap option would be the windowsox on the back doors. They will give you shade and ventilation, but the only security would be a visual deterent.

  4. #4
    Join Date
    Jan 1970
    Location
    Melbourne
    Posts
    1,545
    Total Downloaded
    0
    Mantec make internal windows guards for the rear.

  5. #5
    Sith Guest

  6. #6
    Join Date
    Jan 2010
    Location
    Melbourne
    Posts
    1,801
    Total Downloaded
    0
    Open front bulkhead vents with added vents to back end to get a breeze through. I've seen generic vents put onto rear tub either side of the back door.

    source: Hardtop Roof Vent - Defender Forum - LR4x4 - The Land Rover Forum

    Then theres the land rover ones that went above door on back of roof , around 1989. They revised them with a rubber flap that could only be pushed outwards by air to stop dust/water being drawn in but I guess they continued to have issues with leaks so they were removed from 200tdi defender AFAIK.

    I suppose given Australia's predominantly dusty conditions the best option would be to install a couple of closing vents at the rear that you can open when parked. If you dont like the idea of caging up your windows.

  7. #7
    Lost in Suburbia Guest
    Thanks for all the replies.

    As it has turned out it's not as hot as I though it would be having had a few hot days now. Put window sox on the rear doors though to shade The Spawn on longer journeys.

    Cheers

  8. #8
    Join Date
    Aug 2012
    Location
    Perf, WA
    Posts
    653
    Total Downloaded
    0
    Where did you get the window sox? Also have spawn...

  9. #9
    Join Date
    Jun 2011
    Location
    Berowra Heights NSW
    Posts
    112
    Total Downloaded
    0
    I have been looking for something similar as well.
    When I have the dogs in the back of the 110, I open up the rear windows.
    But if I open them up too much the dogs stick there heads right out of the windows.
    Henry looks like a cattle truck when they do this.
    The Mantec inside security guards looks like they will do the job.
    I have asked them for a delivery price.

  10. #10
    Join Date
    Jan 1970
    Location
    SYDNEY -in the shire.....
    Posts
    8,196
    Total Downloaded
    0
    i always leave my windows open about an inch or less......and on really hot days....i also open the front vents.......

    convectional current makes quite a notable difference.......

Page 1 of 2 12 LastLast

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!