Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Engine Malfunction Light - Defender 90 2012

  1. #1
    Join Date
    May 2012
    Location
    Perth, Northern Suburbs
    Posts
    175
    Total Downloaded
    0

    Engine Malfunction Light - Defender 90 2012

    Hi all, I was driving on the freeway today and the EML came on the dash so i pulled over to the side and got the vehicle manual out to check what the warning meant. I left the car running when i checked the manual. I then went to take off to drive to a safe place before ringing LR assist. When i took off there was a distinct lack of power. It felt like it was somewhere between low range and high range but with a max speed of about 50 km/h. I spoke to LR assist and they told me it sounded like the car had gone into "limp mode" and told me to lock and unlock the car 3 times. This solved the problem of "limp mode" and the power went back to normal however the EML stayed on the dash. I drove home (5 k's) under the recommendation of LR assist and called LR to speak to a service manager who told me to leave it overnight and try it in the morning once the engine had cooled down. He said it should solve the problem but if not then bring it in to get looked at. Just a tip for you guys incase you experience "limp mode" and need to make it home. Lock and unlock 3 times... Cheers Paul

  2. #2
    Join Date
    Oct 2011
    Location
    Thornlie WA
    Posts
    538
    Total Downloaded
    0
    I had the exact same thing on Sunday, mine got towed to Southerns Monday morning. Mine was a faulty fuel pump, still waiting for it to come home

    Oh, but doing the lock, unlock three times didn't elimate the warning light
    Last edited by Shortie; 8th October 2012 at 08:29 PM. Reason: forgot something

  3. #3
    Join Date
    Jan 1970
    Location
    Down the road from Sydney
    Posts
    14,702
    Total Downloaded
    0
    mmm I believe the car will only come out of limp mode if the problem logged is a minor one.

    If its a problem that is likely to cause damage to the car I dont think it does...

    Dont qoute me on that though.
    Our Land Rover does not leak oil! it just marks its territory.......




  4. #4
    Join Date
    May 2012
    Location
    Perth, Northern Suburbs
    Posts
    175
    Total Downloaded
    0
    Thanks for the replies so far. I was told by LR on the phone that if the problem is serious the EML will be red in colour. Mine is amber and it seems to be driving fine at the moment. I'll get it looked at by LR either way.

  5. #5
    Join Date
    May 2012
    Location
    Perth, Northern Suburbs
    Posts
    175
    Total Downloaded
    0
    Quick update. I popped the bonnet before i posted my initial post at about 6:00pm and left it until 7:20pm to give it a chance to cool down. Started it up and the EML turned off straight away. Took it for a quick spin around the block and so far so good. I'll still get it into the dealers though for a look.

  6. #6
    Join Date
    May 2012
    Location
    Perth, Northern Suburbs
    Posts
    175
    Total Downloaded
    0
    Another update. I decided to take it for a longer drive and jumped back onto the freeway and was in 5th gear at 80km/h and i switched up to 6th and the EML came back on and it went back into "limp mode". I limped home and will have it towed to the dealers tomorrow. It seems there is a problem when i go faster than 80km/h... strange

  7. #7
    Join Date
    Feb 2010
    Location
    Stellenbosch, Republic of the Western Cape, RSA
    Posts
    662
    Total Downloaded
    0
    check your turbo hose?

  8. #8
    Ronwong Guest
    Stupid question, but lock and unlock is using the remote key right?

  9. #9
    Join Date
    May 2012
    Location
    Perth, Northern Suburbs
    Posts
    175
    Total Downloaded
    0
    Quote Originally Posted by Ronwong View Post
    Stupid question, but lock and unlock is using the remote key right?
    Yeah mate, may or may not work. It did for me the first time but not the second.

  10. #10
    Join Date
    Aug 2011
    Location
    Warburton WA
    Posts
    933
    Total Downloaded
    0
    So what did the problem turn out to be in the end?

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!