Results 1 to 9 of 9

Thread: Td5 defender won't turn over

  1. #1
    Join Date
    Sep 2007
    Location
    Aussie Expat in NZ
    Posts
    3,451
    Total Downloaded
    0

    Td5 defender won't turn over

    Hi all,



    I'm in a bit of a pickle as I need to move a td5 deefer but it won't turn over- it clicks and the dash lights flicker in time. Sounded like a flat battery but the charger thinks the battery is full and leaving it to charge anyway didn't change anything. I don't have a multimeter with me unfortunately and have to move it first thing tomorrow



    Any ideas? If I can't start it I'll just have to tow it (somewhere safe away from the fires).
    Hercules: 1986 110 Isuzu 3.9 (4BD1-T)
    Brutus: 1969 109 ExMil 2a FFT (loved and lost)

  2. #2
    Join Date
    Oct 2012
    Location
    FNQ
    Posts
    1,723
    Total Downloaded
    0
    Try starting then run your fingers over any cable connections you can reach any hot ones will need cleaning other than that tow start it

  3. #3
    Join Date
    Apr 2008
    Location
    Near Seven Hills, Sydney
    Posts
    4,342
    Total Downloaded
    0
    Hidden kill switch?

  4. #4
    Join Date
    Aug 2012
    Location
    Bejoording WA, 6566
    Posts
    124
    Total Downloaded
    0
    Also check for loose battery leads and dirty terminals on the battery. The clicking noise seems to indicate a lack of power to the starter.

    Cheers
    Ben

  5. #5
    Join Date
    Jul 2009
    Location
    NSW
    Posts
    170
    Total Downloaded
    0
    The battery could have a dropped cell - this happened to me recently. Dash lights dim and only got 1 or 2 turns before it wouldn't crank anymore

  6. #6
    Join Date
    Jan 1970
    Location
    Wodonga
    Posts
    1,304
    Total Downloaded
    0
    Depending on what type of battery you have and also what type of charger as some chargers will not charge some batteries I have had this problem personally. The battery was down on voltage and the charger would not bring it up. IF the battery does have a collapsed cell then it is a jump start. However, this clicking noise generally indicates a dead battery. You could try giving the solenoid a few taps, as this sometimes can help.

    Best of luck

  7. #7
    Join Date
    Jul 2013
    Location
    Alice Springs, NT
    Posts
    253
    Total Downloaded
    0
    When you say the dash lights flick on in time do they actually stay on?

  8. #8
    Join Date
    Oct 2008
    Posts
    917
    Total Downloaded
    0
    Possibly Solenoid contacts in the Starter motor. Does all the standard starting tricks, but nothing happens. The starter has a couple of copper contacts that eventually wear out. You can buy these contacts on ebay for not much. Or you may need a new starter motor.

    I have had some luck with the hammer trick. Get someone to start the engine, or keep the key turned. Then get a hammer and smack the stater motor solenoid. With luck you might get it to engage.
    Alternatively you ought to be able to push start it.
    Also look for oil around the stater motor, I've read that a leaking fuel cooler or other oil leaks can quickly stuff the contacts up.

  9. #9
    Join Date
    Jan 2007
    Location
    SW of Geelong
    Posts
    2,383
    Total Downloaded
    0
    Dirty/oily contacts in the starter solenoid is a common problem on the TD5 and can cause intermittent starting, clicking etc.

    Td5 Starter Repair DIY

    Cheers, Murray
    '88 County Isuzu 4Bd1 Turbo Intercooled, '96 Defender 130 CC VNT
    '85 Isuzu 120 Trayback, '72 SIIA SWB Diesel Soft Top
    '56 SI Ute Cab


Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!