Any word on how yours is progressing, Mark?
MLD
Current: (Diggy) MY10 D130 ute, locked F&R, air suspension and rolling on 35's.
Current: (but in need of TLC) 200tdi 110 ute & a 300tdi 110 ute.
Current: (Steed) MY11 Audi RS5 phantom black (the daily driver)
Gone: (Dorothy) MY99 TD5 D110
we have been very busy with work commitments, shows and trying to move into our new premises
the engine is now running on a stand and programmable, next step is to fit it into vehicle. shall keep you posted
shouldnt be to far off but we do have mountains of work in front of us which takes priority over this project
Working vehicles have engines that produce just the right amount of power and torque to get a job done. You see to much power and too much torque leads to broken drive components. If any of you ever drove a truck loaded at payload you would say that its underpowered not realizing that truck will pull that load all day, everyday and be relaible. The truck could be built with a bigger more powerful motor but then you risk your drive train. The 3.2 in the rangers reads well on paper and no doubt would pull a lot better than the 2.2. However the 2.2 has proven itself in the transit which is renowned for high milage and hard work. The 3.2 is in my opinion not necessary in the defender, mine wont ever win any races but it pulls heavy loads and does it whilst producing low egts and being quiet frugal on fuel. Thats the other thing working vehicles have is decent fuel use, too much power and a working vehicle becomes a not so working vehicle as its to expensive to run. My opinion
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks