-
18th March 2014, 09:21 PM
#11
Yeah I have a P3 as well operating electric over hydraulic brakes.....smooth as
-
19th March 2014, 08:51 AM
#12
Hi Guys (ctgiles84, Kelvin & Nino)
Sorry to hijack this thread but your info is invaluable!
Can you send a photo of where you mounted it in Defender?
The gear lever and high low lever on floor. Did you mean in front of that below the air conditioning button. How did you fasten it to the flimsy plastic there?
Researched the P3 unit and it can be almost vertical as long as it is horizontal. Does it get in the way of gear levers?
Cheers Brad
-
19th March 2014, 05:45 PM
#13
The search function here is pretty clunky (normally throws up 20 pages worth when I search something) but if you trawl through all of the results you will normally gets results.
Have a look here http://www.aulro.com/afvb/projects-t...oller-d90.html it might give you some ideas.
I made that thread for this exact reason, some detailed info on running cables etc, but bear in mind that was just my method not saying its the best, there are probably other ways, just not many documented to give any idea.
Mick.
-
20th March 2014, 06:04 AM
#14
Mick,
Thank you very much for the reply. This a perfect place to mount it. I tried searching the treads but did not find your thread. Well done.
All the other who have assisted a big thank you to you to. Isn't it a nice thing to be able to do this with this network.
Cheers Brad
-
20th March 2014, 06:18 AM
#15
No worries Brad hopefully it helps. Thats what I meant about the search function it seems a bit hit and miss.
You're right, it is a great network of knowledge here.
Mick
-
22nd March 2014, 07:20 PM
#16
Few years ago towed our trak shak camper[well over a tonne]up to the daintree behind our chipped 130,pulled like a train.Mounted the tekonsha voyager on top of dash to right of steering wheel.Pulled out of a caravan park at port douglas turning right,had to get across in a hurry so wound the hair dryer up a bit and took off,bit of noise and black rubber on road
-
23rd March 2014, 06:10 PM
#17
Brad sorry for not replying had not looked at this for a couple days. I hope it worked out ok for you.
Chris
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search AULRO.com ONLY!
|
Search All the Web!
|
Bookmarks