Results 1 to 9 of 9

Thread: Td5 turbo whistle

  1. #1
    Join Date
    May 2010
    Location
    Gisborne
    Posts
    402
    Total Downloaded
    0

    Question Td5 turbo whistle

    Hi all.
    Just recently I've noticed the turbo whistle appears louder than usual.
    It's Very Noticeable.

    It's only loud when you are exellerating harder thru 2nd gear and more often in low range.

    It doesn't sound right.
    Any ideas?

  2. #2
    Join Date
    Nov 2011
    Location
    Surf Coast
    Posts
    26
    Total Downloaded
    0

    TD5 turbo whistle

    Might be that the rubber pipework in your engine bay needs to be replaced.

    That's what happened on my D3 a couple of years back - replaced the rubber with silicone and that seemed to solve the problem. I could hear it noticably thru the AC vents which I thought was unusual.

    D3mike

  3. #3
    schuy1 Guest
    Manifold? loose hoses?

  4. #4
    Join Date
    Apr 2007
    Location
    Northern Hunter Valley,Dungog Shire
    Posts
    478
    Total Downloaded
    0
    Hi Noogie, when this happened to my TD5 a couple of years ago it turned out to be a broken exhaust manifold stud allowing the gases to escape through a tiny gap. You may be able to see black marks around the area of the manifold which would indicate where the problem is or you can listen with a short length of garden hose to try and locate any different sounds in the exhaust manifold area. The last is impossible to do while driving so is not a good guide if the noise is only audible under load. Cheers, 130man.

  5. #5
    Join Date
    Mar 2008
    Location
    Sydney, NSW
    Posts
    1,484
    Total Downloaded
    0
    Yep, my money would be on manifold stud(s) sheared.
    Regards,
    Jon

  6. #6
    Join Date
    Jul 2009
    Location
    NSW
    Posts
    170
    Total Downloaded
    0
    +1 broken stud. Manifold is probably bent like a banana

  7. #7
    Join Date
    Feb 2010
    Location
    Melbourne
    Posts
    316
    Total Downloaded
    0

    Manifold

    Haven't you done the exhaust manifold studs previously Mick?

    Brad

  8. #8
    Join Date
    May 2010
    Location
    Gisborne
    Posts
    402
    Total Downloaded
    0
    Yes I did my manifolds studs a few months back, but reflecting back I remember he didn't replace one as he said it looked ok.

    I'll have a sniff around.
    Thanks for your help everyone.

  9. #9
    Join Date
    Jan 1970
    Location
    Nanny state UK...
    Posts
    3,253
    Total Downloaded
    0
    Whistling too loud???

    ...you could always try teaching it the words.

    M

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!