Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 41

Thread: PUMA brakes fail rego check ........

  1. #31
    Join Date
    Oct 2008
    Posts
    917
    Total Downloaded
    0
    Better pedal on second press is likely to point to play on the wheel bearings.

  2. #32
    Join Date
    Apr 2009
    Location
    Central Coast NSW
    Posts
    1,576
    Total Downloaded
    0
    Quote Originally Posted by BilboBoggles View Post
    Better pedal on second press is likely to point to play on the wheel bearings.
    Really .......

    There is no indication of a wheel bearing issue.

    But I will check it out, happy to check and try anything at this stage.

  3. #33
    Join Date
    Oct 2006
    Location
    canberra
    Posts
    3,002
    Total Downloaded
    0
    Quote Originally Posted by chopper View Post
    second pump gives a better pedal , indicates air in the system somewhere.
    clamp the hose/hoses to each wheel one wheel at a time and apply the brake each time .If it gets better then the problem is at that calliper.
    Not exactly its a common mistake made with diesels hit the pedal a couple of times and it gets hard like there's air in the system but actually its just that the vacuum pump is slow. I don't know how many inches a puma pump pulls but you want about 25" at idle

  4. #34
    Join Date
    Oct 2007
    Posts
    370
    Total Downloaded
    0
    If it has only been bled normally, then a pressure bleed may be worthwhile, as the rush of brake fluid will better dislodge residues as well as any air that is difficult to remove with manual bleeding.

  5. #35
    Join Date
    Jan 1970
    Location
    Sussex Inlet. N.S.W.
    Posts
    6,908
    Total Downloaded
    0
    My wife's Hyundai had new rotors and pads fitted by the dealer last service. I drove it home and nearly wiped myself out the first time I had to brake solidly. There was hardly any. Now I know that new pads have to be bedded in but these were ridiculous, just like there was no vacuum. However since they bedded in they are now great but it took around 500km to bed in.
    Jim VK2MAD
    -------------------------
    '17 Isuzu D-Max

  6. #36
    Join Date
    May 2007
    Location
    Safety Bay
    Posts
    8,041
    Total Downloaded
    0
    Pump the peddle so it's hard and then start the engine,the peddle should drop 1/2'',if it doesn't you have no vacuum,even with ABS the wheels will lock up,the ABS unlocks the wheels,if they don't lock the ABS won't work. Pat

  7. #37
    Join Date
    Jul 2008
    Posts
    312
    Total Downloaded
    0
    ,even with ABS the wheels will lock up,the ABS unlocks the wheels,if they don't lock the ABS won't work. Pat[/QUOTE]

    WRONG.

  8. #38
    Join Date
    May 2007
    Location
    Safety Bay
    Posts
    8,041
    Total Downloaded
    0
    Chopper,how do you think ABS works?. Pat

  9. #39
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    I wonder what's wrong with the brake tester of a mates as I struggle to get the Deefer passed and the brakes are pretty much new?

    In use they work fine and it pulls up nice and straight. All I can think of it's the 33's working against it.

    Any play at all in the wheel bearings will give a longer than normal pedal, and any degree of pad wear can allow pad knock off, again giving a longer than normal pedal.

    Any time driving dirt I always give a confidence tap coming into a corner as the pads will often knock back a little, particularly when pressing on.
    It's just habit

  10. #40
    Join Date
    Jul 2008
    Posts
    312
    Total Downloaded
    0
    Quote Originally Posted by PAT303 View Post
    Chopper,how do you think ABS works?. Pat
    I briefly described it back a few posts,
    do you really think it locks up and then unlocks ? You can do that yourself without ABS ( A - for "antilock" ) ABS doesn't just release pressure to a rapidly slowing wheel it also applies pressure to faster wheels . Its based on the average speed of all the wheels monitored MANY times per second and keeps them altogether speed wise. A wheel will only skid if it is aloud to slow down at a greater rate than the others. If a wheel starts to slow down on mud gravel ice or a slippery patch on the road the system releases the pressure to the wheel/wheels in question before the wheel skids, this way you are still able to steer the car around the corner otherwise you would be over the bank down in the gully wondering why you ordered ABS and only got BS.

Page 4 of 5 FirstFirst ... 2345 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!