almost anywhere you like that doesnt look like a fuel tank or exhaust pipe so long as you cover it with a decent apron.
a folded tarp, welders apron, hession matting and horse blankets work well, as do your floor mats and seat covers.
 Fossicker
					
					
						Fossicker
					
					
                                        
					
					
						Im not mechanically minded and I have an exhaust Jack for my 110 (Bushtracker).
Any suggestions on areas under the vehicle in which to blow up the bag without popping it or damaging car?
almost anywhere you like that doesnt look like a fuel tank or exhaust pipe so long as you cover it with a decent apron.
a folded tarp, welders apron, hession matting and horse blankets work well, as do your floor mats and seat covers.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
 Master
					
					
						Master
					
					
                                        
					
					
						Welders apron for the win
Hi,
it wasn't exactly what I would call stable.
cheers
 Master
					
					
						Master
					
					
                                        
					
					
						It looks like they're playing with a defender sized whoopee cushion!
As fate would have it, I got bored last weekend and decided to see how my exhaust jack played with my 110.
So my contribution to the brains trust is as follows:
- Under the axles is the best spot to lift from (yes this is probably obvious, but...)
- There isn't a good spot to jack from forwards of the front axle when stock, aftermarket bash plates might help
- When lifting from the front axle, try not to load up any of the steering components
- Between the axles, either chassis rail works but will give limited tyre lift due to suspension travel length and chassis rail height (on flat ground)
- Jacking from under the rear cross member is possible (not sure how advisable, part load on the petrol tank protector)
- Unless you are looking to lift and shift (sideways), handbrake on and chock front and back all the wheels that won't be lifted
- You can move one axle the truck about 1 foot sideways if you lift to max height and then just push - but probably not great for the longevity of your jack of the ground is rough / sharp
- Lifting with an exhaust gets "interesting" on anything other than completely flat ground (read: not particularly stable!)
- An unloaded 110 lifts well before even half the max pressure on my XJack
- The exhaust piping isn't that hot, but steer clear of it as much as you can
- Cover your jack with canvas, as some of the bits under the defender are sharper than they should be
- It is a bit finicky trying to get the jack input to sit nicely on an exhaust pipe
- Make sure the pipes are flat when trying to inflate, as kinks seem to make it that much harder to get inflation started
- An exhaust jack is a LOT quicker than any other jack - great for a lazy person like me
- Cover your jack cover with an old cloth, as the bottom of a defender is covered in varying thickness of black grease
HTH
 Fossicker
					
					
						Fossicker
					
					
                                        
					
					
						Cheers for brief.
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks