Yeah mate.
1) Lock car.
2) Unlock car
3) Disconnect battery earth within 17s (according to fsm)
4) when you reconnect the key fob won't work. You need to start engine before you can use the fob. I think it need to recode itself or something... I'll dig up some info tonight .
-Mitch
'El Burro' 2012 Defender 90.
Amendment to above- FSM recommends:
1) Disconnect the battery ground cable.
2) Loosen the nut.
3) Turn the ignition key to the run position.
4) Turn the ignition key to the off position.
5) Within 17 seconds of turning the ignition key to the
off position, release the battery ground cable from
the battery.
So locking / unlocking not necessary. Cycle between Run and Off key positions before disconnect within 17s.
-Mitch
'El Burro' 2012 Defender 90.
I didn't know that. Lucky nothing bad happened when I did it.
Cheers, Billy.
Keeping it simple is complicated.
Achievement get: 3years of defender ownership as of 07.05.2017.
-Mitch
'El Burro' 2012 Defender 90.
I think the amendment needs an amendment.
Delete item 1 as this is a heading for the procedure. The procedure is:
1)Loosen the nut of the ground cable. (don't disconnect yet).
2)Turn the ignition key to the run position.
3)Turn the ignition key to the off position.
4)Within 17 seconds of turning the ignition key to theoff position, release the battery ground cable from the battery.
This is the procedure in the workshop manual.
Yeah, I read it and thought it sounded a bit odd. Guilty of the old copypasta from the FM (as in RTFM).
It's like the old story about how to disarm a bomb- 1) Cut the red and blue wires. 2) But first, cut the black wire.
The devil is in the detail.
-Mitch
'El Burro' 2012 Defender 90.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks