Results 1 to 4 of 4

Thread: 300tdi coolant hoses

  1. #1
    Join Date
    Jan 2013
    Location
    N.S.W
    Posts
    49
    Total Downloaded
    0

    300tdi coolant hoses

    Hi All
    I am thinking of renewing all of my coolant hoses and was wondering what brand to get or not to get and if silicone ones are worth the extra money.
    Thanks

  2. #2
    Join Date
    May 2007
    Location
    Safety Bay
    Posts
    8,041
    Total Downloaded
    0
    Get genuine,it's not worth the risk and buy from the UK.Are you doing a rad clean,thermostat,heater hoses,header tank cap,viscous hub or are you doing it half arsed?. Pat

  3. #3
    Join Date
    Jan 2013
    Location
    N.S.W
    Posts
    49
    Total Downloaded
    0
    Thanks Pat303
    I put a new rad and viscous hub in 2 years ago. Going to replace all the hoses. Didn't think about the thermostat or header tank cap but will replace them as well. Try and get most of my parts from the UK depends on how quickly I need them. I am planning on getting some parts sent over and I thought I should get some new hoses at the same time.

  4. #4
    Join Date
    May 2007
    Location
    Safety Bay
    Posts
    8,041
    Total Downloaded
    0
    With the thermostat make sure the bleed hole is at the top,most important,fill the motor via the header tank with the plug in the thermostat housing out,replace the plug with a brass one,when the coolant flows out fill the header full and go for a drive,get it hot and top up,easy. Pat

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!