Just push the top in and push up and then push the bottom in all the way,
You just have to compress the clip at the top...
That is if you have a mirror like mine in the photo attached.
Mike.
Hey guys silly question but been stuck on this all day. I've taken my rear view mirror out and now want to put it back in. Having solid dramas over it, the bloody thing will not go back in. Driving a 1999 110 and it's spring loaded, any tips or tricks to help me out
 Master
					
					
						Master
					
					
                                        
					
					
						Just push the top in and push up and then push the bottom in all the way,
You just have to compress the clip at the top...
That is if you have a mirror like mine in the photo attached.
Mike.
Last edited by Dopey; 29th December 2016 at 03:38 PM.
 Master
					
					
						Master
					
					
                                        
					
					
						Same as mine 2002 defa 110 needs a bit of force but does go in
 Master
					
					
						Subscriber
					
					
						Master
					
					
						SubscriberFrom memory, there are two spring loaded tabs that engage in the mounting block. I had to give the two pins a little touch of grease and then exercised them with a vice, as they had gotten a bit stiff with age. Once that was done it was still a bastard to get it, but much less of a bastard.
 Master
					
					
						Master
					
					
                                        
					
					
						My 2014 110 has the same setup. The method suggested by Mike (90@) is the same one that I use and it goes pretty easy.
Cheers,
Nige
If in doubt use more force. You'll get there....
It's not broken. It's "Carbon Neutral".
gone
1993 Defender 110 ute "Doris"
1994 Range Rover Vogue LSE "The Luxo-Barge"
1994 Defender 130 HCPU "Rolly"
1996 Discovery 1
current
1995 Defender 130 HCPU and Suzuki GSX1400
Cheers guys my spring was all seazed up got it sorted now
| Search AULRO.com ONLY! | Search All the Web! | 
|---|
|  |  | 
Bookmarks